A Noninvasive Monitoring Method for Uniformity of Pressure Distribution on the Chip Surface in Single-Chip Press-Pack IGBTs With Turn-Off v CE
- 9 December 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (5) , 7800-7812
Abstract
In a press-pack insulated gate bipolar transistor (PPI), the uniformity of pressure distribution on the chip surface significantly impacts its reliability. Currently, this uniformity is primarily assessed by pressure film, which is invasive and limited. This article proposes an electrical parameter method for monitoring uniformity of pressure distribution on the chip surface in single-chip PPIs offline at room temperature. First, the collector voltage at a specified moment during turn-off, Vce,D, is introduced as a highly sensitive indicator of this uniformity. For example, a mere 1 mm misalignment between the clamping force center and the chip center can cause a variation in Vce,D exceeding 100 V. To minimize interference from other factors, monitoring with Vce,D is performed at room temperature, and its implementation method is carefully developed. Second, the proposed method is validated with a specially designed experimental platform. Its broad applicability across various chip types and packaging technologies is illustrated as well. Moreover, a detailed comparison between this novel method and traditional pressure film is provided. The proposed method is noninvasive, highly sensitive, and supports quantitative assessment. Finally, the method's measurement error margin, and its great potential for extension to multichip PPIs are discussed.Keywords
Funding Information
- National Natural Science Fund for Distinguished Young Scholars (52225701)
This publication has 35 references indexed in Scilit:
- Overview of monitoring methods of press‐pack insulated gate bipolar transistor modules under different package failure modesIET Power Electronics, 2022
- Analytical model for dynamic avalanche onset of planar IGBTsMicroelectronics Reliability, 2020
- Design, analysis, and testing of PP‐IGBT‐based submodule stack for the MMC VSC HVDC with 3000 A DC bus currentThe Journal of Engineering, 2019
- Extraction of dynamic avalanche during IGBT turn offMicroelectronics Reliability, 2017
- Use Moving Average Filter to Reduce Noises in Wearable PPG During Continuous Monitoring2016
- Influence of the clamping pressure on the electrical, thermal and mechanical behaviour of press-pack IGBTsMicroelectronics Reliability, 2013
- Mechanical analysis of press-pack IGBTsMicroelectronics Reliability, 2012
- Dynamic avalanche in bipolar power devicesMicroelectronics Reliability, 2012
- Thermo-mechanical finite element analysis in press-packed IGBT designMicroelectronics Reliability, 2000
- A highly reliable press packed IGBTElectrical Engineering in Japan, 2000