Long-term thermal insulation and acoustic absorption performance of textile fibre-reinforced cement mortars
Open Access
- 17 November 2026
- journal article
- Published by Emerald Publishing in Smart and Sustainable Built Environment
- p. 1-39
Abstract
Purpose: This study aims to develop a sustainable cement mortar incorporating post-industrial textile waste fibres and evaluate long-term performance, together with the underlying mechanisms governing the behaviour. Design/methodology/approach: Waste textile fibres (cotton, polyester, nylon and elastane) were incorporated into cement mortars and evaluated at 28, 90, 180 and 365 days to assess thermal conductivity, sound absorption, compressive strength and drying shrinkage. Microstructural characterisation using scanning electron microscopy (SEM), micro-computed tomography (Micro-CT) and nanoindentation was conducted to investigate microstructure, pore structure and interfacial transition zone (ITZ) behaviour of fibre-reinforced cement mortars (FRMs). A multicriteria decision-making approach based on the Simple Additive Weighting (SAW) method was applied to rank the mix formulations in terms of thermal, acoustic, compressive strength and shrinkage performance. Findings: The overall best-performing ELS FRM achieved the lowest thermal conductivity (0.8 W/mK), around 38% higher average sound absorption than the control, a compressive strength of 49 MPa and approximately 10% lower total shrinkage compared to the control at one-year age. Porosity analysis revealed that ELS FRM exhibited the highest total porosity among all mixes, governed primarily by the high elasticity and fibre geometry of elastane, which can promote air entrapment during mixing and lead to increased internal void content. Despite this porous structure, the high elasticity and deformation compatibility of elastane fibres govern improved stress redistribution and crack-bridging within the matrix, thereby maintaining compressive strength and reducing shrinkage. Originality/value: This research addresses key limitations in existing FRMs by furthering the scarcity of studies extending beyond early ages (7–90 days) and the lack of coupled long-term datasets linking thermal, acoustic, compressive strength and shrinkage performance. In addition, this study develops a clearer understanding of the underlying mechanisms governing performance by addressing the limitation that most existing studies rely on isolated testing ages and SEM observations, without integrated characterisation of microstructure, porosity and ITZ properties. This paves the way for scalable FRM production and practical use in non-load-bearing applications subject to further validation under real exposure conditions.This publication has 69 references indexed in Scilit:
- Impact of varying basalt fibre size on the acoustical properties of low carbon concreteApplied Acoustics, 2025
- Textile waste management and its sustainability: a reviewJournal of Material Cycles and Waste Management, 2025
- Sufficient number of core samples and method to determine compressive strength of in‐use and reclaimed concrete elementsStructural Concrete, 2025
- Comprehensive Review of Textile Waste Recycling: From Origins to InnovationsFibers and Polymers, 2025
- Thermal and acoustic performance of solid waste incorporated cement based composites: an analytical reviewArchives of Civil and Mechanical Engineering, 2025
- Acoustic analyses of mortars prepared with recycled aggregatesApplied Acoustics, 2023
- A study on the relationship between porosity of the cement paste with mineral additives and compressive strength of mortar based on this pasteCement and Concrete Research, 2006
- The effect of chemical admixtures and mineral additives on the properties of self-compacting mortarsCement and Concrete Composites, 2006
- Free, restrained and drying shrinkage of cement mortar composites reinforced with vegetable fibresCement and Concrete Composites, 2005
- Prediction of the maximum packing fraction achievable in randomly oriented short-fibre compositesComposites Science and Technology, 1986