Al-Cu-Fe Coatings Manufactured by Flame Spraying Process
Authors:
- 17 August 2016
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 32 (4) , 383-388
Abstract
Two-hour milled (activated) Al–20Cu–15Fe (at%) powders were subjected to annealing at 600°C for 1 h. The phase and microstructural evolutions were characterized by X-ray diffractometry and scanning electron microscopy. Al7Cu2Fe and Al60Cu30Fe10 phases were formed after annealing. Both annealed and milled powders were consolidated using the flame spraying process. In both cases, FeAl(Cu) was the major phase while some oxides and α-Fe(Al,Cu) were also found. The coating produced from the milled powder was severely cracked and showed higher oxide content. The coating prepared from the annealed powder showed better quality. It was annealed at 600°C for 1 h to investigate the thermal stability of the various phases. All phases persevered after annealing while the Fe2Al5 phase was formed as a new phase.Keywords
This publication has 25 references indexed in Scilit:
- Al-Cu-Fe (Aluminum-Copper-Iron)Journal of Phase Equilibria and Diffusion, 2010
- Physical vapor deposition route for production of Al–Cu–Fe–Cr and Al–Cu–Fe quasicrystalline and approximant coatingsSurface and Coatings Technology, 2005
- Laser cladding of quasicrystal forming Al–Cu–Fe on aluminumJournal of Non-Crystalline Solids, 2004
- Microstructure, fabrication and properties of quasicrystalline Al–Cu–Fe alloys: a reviewJournal of Alloys and Compounds, 2004
- Influence of Cr alloying on the microstructure of thermally sprayed quasicrystalline Al–Cu–Fe coatingsIntermetallics, 2003
- Effects of air plasma spraying parameters on the Al–Cu–Fe quasicrystalline coating layerJournal of Non-Crystalline Solids, 2000
- Corrosion behavior of Al-Cu-Fe quasicrystalsMaterials Science and Engineering: A, 2000
- Microindentation of Al-Cu-Fe icosahedral quasicrystalScripta Materialia, 1999
- Abrasive wear behavior of Al–Cu–Fe quasicrystalline composite coatingsMaterials Science and Engineering: A, 1998
- Particle size effects on chemistry and structure of Al-Cu-Fe quasicrystalline coatingsJournal of Thermal Spray Technology, 1996