Supersonic cold-sprayed Si composite alloy as anode for Li-ion batteries
Open Access
- 9 January 2023
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (2)
Abstract
The increasing demand for lithium-ion batteries (LIBs) continuously stimulates the research community to seek advanced fabrication of anodes with improved performance and lifespan. Silicon (Si), as one of the most promising anode materials, has been the main focus of both research and industry. In this paper, we report a type of Si alloy anode for LIBs manufactured by the supersonic cold spray technique. The microscopic analysis revealed the uniform morphologies of the anodes, indicating that Si and other metal particles were well bonded. Specific discharge capacities were obtained for the cold-sprayed anodes by half-coin cell tests, with the highest value of 1047 mAh g−1 at a current rate of 0.05 C. Most importantly, the energy-dispersive x-ray spectroscopy results demonstrated none oxidation of the powders after the cold spray process. The results strongly indicate that the concept of using cold spray technique to fabricate Si alloy anode is feasible. Compared to the conventional methods of fabricating Si anodes, the cold spray approach is simple, convenient, and scalable. This method may revolutionarily change the LIBs industries.Keywords
Funding Information
- Air Force Research Laboratory (FA864920-P-0398)
This publication has 14 references indexed in Scilit:
- SiO2/N-doped graphene aerogel composite anode for lithium-ion batteriesJournal of Materials Science, 2020
- Supersonic Cold Spraying for Energy and Environmental Applications: One‐Step Scalable Coating Technology for Advanced Micro‐ and Nanotextured MaterialsAdvanced Materials, 2019
- Concept of reliability and safety assessment of lithium-ion batteries in electric vehicles: Basics, progress, and challengesApplied Energy, 2019
- Nanofluids as Media for High Capacity Anodes of Lithium-Ion Battery—A ReviewJournal of Nanofluids, 2019
- Lithium-ion batteries: outlook on present, future, and hybridized technologiesJournal of Materials Chemistry A, 2019
- Advanced Lithium‐Ion Batteries for Practical Applications: Technology, Development, and Future PerspectivesAdvanced Materials Technologies, 2018
- Cold spraying – A materials perspectiveActa Materialia, 2016
- The effects of heat treatment on the mechanical properties of cold-sprayed coatingsSurface and Coatings Technology, 2015
- Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditionsProgress in Materials Science, 2014
- The Influence of Powder Particle Velocity and Microstructure on the Properties of Cold Sprayed Copper CoatingsJournal of Thermal Spray Technology, 2011