Preparation of Thin Palladium Membranes by a Novel Method Based on Photolithography and Electrolysis.
- 1 January 2001
- journal article
- Published by Taylor & Francis in JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
- Vol. 34 (5) , 703-705
Abstract
A negative resist was spin-coated on the surface of a 50-μm thick copper film, and was solidified as a protection film. A palladium layer was then electrodeposited on the other uncovered surface. After removing the protection film, the resist was again spin-coated on the copper surface, and a pattern of microslits was transferred by photolithography. After development, the microslits were electrolytically etched out. Thus a palladium membrane of 5 mm in diameter was formed as an assemblage of thin layers formed in the microslits. The palladium membranes prepared were characterized by SEM observation, as well as by permeation measurements for hydrogen and nitrogen at 573-873 K. The palladium membrane, which was 3 μm in thickness and formed on a polished copper film, showed separation factor of hydrogen to nitrogen of 120 at 873 K.Keywords
This publication has 10 references indexed in Scilit:
- Microreactors2000
- Steam reforming of methane in membrane reactors: comparison of electroless-plating and CVD membranes and catalyst packing modesCatalysis Today, 2000
- Preparation of a Catalytic Reactor Composed of a Microchannel Etched on a Silicon Wafer.KAGAKU KOGAKU RONBUNSHU, 2000
- Microreaction Technology: Industrial Prospects2000
- Palladium composite membranes by electroless plating techniqueJournal of Membrane Science, 1999
- State-of-the-art in microreaction technology: concepts, manufacturing and applicationsElectrochimica Acta, 1999
- Preparation of a palladium alloy composite membrane supported in a porous stainless steel by vacuum electrodepositionJournal of Membrane Science, 1999
- Multilayer metal membranes for hydrogen separationInternational Journal of Hydrogen Energy, 1998
- Palladium Membrane Formed in Macropores of Support Tube by Chemical Vapor Deposition with Crossflow through a Porous WallSeparation Science and Technology, 1995
- Thin Palladium Membrane Formed in Support Pores by Metal-Organic Chemical Vapor Deposition Method and Application to Hydrogen SeparationIndustrial & Engineering Chemistry Research, 1994