Magnesium Alloy Matching Layer for PMN-PT Single Crystal Transducer Applications
- 31 July 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 65 (10) , 1865-1872
Abstract
In this paper, we propose using magnesium alloy as the matching layer for the ultrasonic transducer made of 0.68 Pb(Mg 1/3 Nb 2/3 )O 3 -0.32PbTiO 3 (PMN-0.32PT) single crystal. The complete sets of elastic constants of AZ31B, GW83, and ZK60 magnesium alloys have been measured, which is practically a homogeneous material. The AZ31B magnesium alloy has an acoustic impedance of 10.36 MRayl, which is suitable for the development of high-performance ultrasonic transducers. A 3.5-MHz PMN-PT single crystal transducer has been designed and fabricated successfully using AZ31B magnesium alloy as the first quarter-wavelength matching layer. The -6-dB bandwidth and two-way insertion loss at the center frequency of the transducer are about 67% and 11.4 dB, respectively, much superior to the transducer fabricated using 0-3 composite matching layer. The high performance of this transducer indicates that the magnesium alloy is indeed an excellent matching layer material for ultrasonic transducer applications.Keywords
Funding Information
- National Natural Science Foundation of China (11704249, 51572056)
- China Postdoctoral Science Foundation (2017M621462)
- National Key Research and Development Program of China (2016YFB0301103)
This publication has 22 references indexed in Scilit:
- Mass-spring matching layers for high-frequency ultrasound transducers: a new technique using vacuum depositionIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2014
- Lead-free BNT composite film for high-frequency broadband ultrasonic transducer applicationsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2013
- Correspondence: Lead-free intravascular ultrasound transducer using BZT-50BCT ceramicsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2013
- High frequency PMN–PT single crystal focusing transducer fabricated by a mechanical dimpling techniqueUltrasonics, 2013
- Lead-free piezoelectric single crystal based 1–3 composites for ultrasonic transducer applicationsSensors and Actuators A: Physical, 2012
- Micromachined high frequency PMN-PT/epoxy 1–3 composite ultrasonic annular arrayUltrasonics, 2012
- PMN–PT single crystal focusing transducer fabricated using a mechanical dimpling techniqueUltrasonics, 2012
- Fabrication and comparison of PMN-PT single crystal, PZT and PZT-based 1-3 composite ultrasonic transducers for NDE applicationsUltrasonics, 2010
- Elastic, piezoelectric, and dielectric properties of 0.58Pb(Mg1/3Nb2/3)O3-0.42PbTiO3 single crystalJournal of Applied Physics, 2004
- Elastic, piezoelectric, and dielectric properties of multidomain 0.67Pb(Mg1/3Nb2/3)O3–0.33PbTiO3 single crystalsJournal of Applied Physics, 2001