Characterization and Fabrication of the CFM-JTE for 4H-SiC Power Device with High-Efficiency Protection and Increased JTE Dose Tolerance Window
Open Access
- 10 November 2020
- journal article
- research article
- Published by Springer Nature in Discover Nano
- Vol. 15 (1) , 1-8
Abstract
A 13.5 kV 4H-SiC PiN rectifier with a considerable active area of 0.1 cm2 is fabricated in this paper. Charge-field-modulated junction termination extension (CFM-JTE) has been proposed for satisfying the requirement of ultra-high reverse voltage, which enlarges the JTE dose tolerance window, making it approximately 2.8 times that of the conventional two-zone JTE. Besides, the CFM-JTE can be implemented through the conventional two-zone JTE process. The measured forward current is up to 100 A @ VF = 5.2 V in the absence of carrier lifetime enhancement technology. The CFM-JTE structure accomplishes 96% of the theoretical breakdown voltage of the parallel plane junction with a relatively small terminal area of 400 μm, which contributes to achieving the Baliga’s figure of merit of 58.8 GW/cm2.Keywords
Funding Information
- National Natural Science Foundation of China (61974016)
- Science Challenge Project (TZ2018003)
- National Key Research and Development Program of China (2018YFB0905702)
This publication has 23 references indexed in Scilit:
- Experimental study and characterization of an ultrahigh-voltage Ni/4H–SiC junction barrier Schottky rectifier with near ideal performancesSuperlattices and Microstructures, 2020
- Design and Characteristics of an Etching Field Limiting Ring for 10kV SiC Power Device2019
- Multizone Gradient-Modulated Guard Ring Technique for Ultrahigh Voltage 4H-SiC Devices With Increased Tolerances to Implantation Dose and Surface ChargesIEEE Journal of Emerging and Selected Topics in Power Electronics, 2019
- Assessment of 10 kV, 100 A Silicon Carbide mosfet Power ModulesIEEE Transactions on Power Electronics, 2017
- Counter-Doped JTE, an Edge Termination for HV SiC Devices With Increased Tolerance to the Surface ChargeIEEE Transactions on Electron Devices, 2014
- Fabrication of uniform 4H-SiC mesopores by pulsed electrochemical etchingDiscover Nano, 2014
- Metal work-function-dependent barrier height of Ni contacts with metal-embedded nanoparticles to 4H-SiCDiscover Nano, 2012
- Investigation of carrier lifetime in 4H-SiC epilayers and lifetime control by electron irradiationApplied Physics Letters, 2007
- A new analytic method to design multiple floating field limiting rings of power devicesSolid-State Electronics, 2006
- Reduction of the Schottky barrier height on silicon carbide using Au nano-particlesSolid-State Electronics, 2002