Integration of RNN and CatBoost models in a tea-waste biochar filtration system for toxic organic pollutant removal efficiency prediction
Open Access
- 25 July 2025
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (33) , 27260-27278
Abstract
Water pollution is a dreadful global crisis undermining the environment and economy. In order to combat this issue, several methods and techniques are adopted for treating the polluted water. Adsorption by biowastes is one of the most economically viable, simple, and effective methods for wastewater treatment. In spite of numerous reports in the literature showing the removal of various pollutants, there is still room for investigation in the field of simultaneous adsorption of varied categories of pollutants. The present study focuses on the simultaneous removal of organic water contaminants like dyes, agrochemicals, and aromatic compounds from wastewater using biochar prepared from tea waste as adsorbent. A detailed investigation on the effect of contact time, pH, dosage, and temperature on the adsorption performance of adsorbent has been carried out. At optimized reaction condition of 5 mg ml−1 of adsorbent dosage at pH 2 for 60 min, 82.66% overall removal was obtained for 40 ppm of pollutant (malachite green, congo red, chlorpyrifos, and 4-nitroaniline) mixture. Further, the percentage removal was predicted using two machine learning (ML) models: CatBoost and Recurrent Neural Network (RNN), with and without Bayesian optimization. The prediction capability of these models was evaluated using three performance metrics: coefficient of determination (R2), Mean Absolute Error (MAE), and Root Mean Square Error (RMSE). Based on the evaluation, RNN was found to be the most effective model for % removal prediction based on higher R2 value of 0.960. Moreover, the fabrication of a portable column filtration device for the removal of coexisting harmful organic pollutants has been demonstrated. The results confirm that tea waste (TW)-derived biochar, coupled with advanced machine learning models, is a promising solution for real-time wastewater treatment.Keywords
Funding Information
- King Faisal University (KFU252589)
This publication has 68 references indexed in Scilit:
- A Facile One‐Pot Approach for Synthesis of Graphene‐CdS Nanocomposites and Implementation towards Visible Light Driven Photocatalytic Degradation of Chlorpyrifos (One‐Pot Synthesis of G‐CdS for the degradation of CPY)**ChemistrySelect, 2024
- Synthesis of zeolite-doped polyaniline composite for photocatalytic degradation of methylene blue from aqueous solutionEnvironmental Science and Pollution Research, 2023
- Effective adsorption of chlorpyrifos pesticides by HKUST-1 metal-organic frameworkJournal of Chemical Sciences, 2022
- Adsorption study of bisphenol-A and chlorpyrifos onto nanobentonite intercalated with magnetite and sodium alginate: kinetics and isotherm modelsInternational Journal of Environmental Science and Technology, 2022
- Biochar physicochemical properties: pyrolysis temperature and feedstock kind effectsReviews in Environmental Science and Bio/Technology, 2020
- Production and characterization of tea waste–based biochar and its application in treatment of Cd-containing wastewaterBiomass Conversion and Biorefinery, 2019
- Fixed-bed column adsorption study: a comprehensive reviewApplied Water Science, 2019
- Tea waste derived activated carbon for the adsorption of sodium diclofenac from wastewater: adsorbent characteristics, adsorption isotherms, kinetics, and thermodynamicsEnvironmental Science and Pollution Research, 2018
- Nanocellulose as a novel nanostructured adsorbent for environmental remediation: a reviewCellulose, 2017
- Identification of Dalbergia cochinchinensis (CITES Appendix II) from other three Dalbergia species using FT-IR and 2D correlation IR spectroscopyWood Science and Technology, 2016