Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Rama Gaur has a total of 136 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Automated machine learning approach for accurate prediction of adsorptive removal of dye in a coconut fiber packed column system

    by Stuti Jha, Vipin Shukla, Syed Shahabuddin, Arunima Nayak, Shweta Bisht, Inderjeet Tyagi, Suhas, Mohammed E. Ali Mohsin, Suleiman Mousa, Rama Gaur

  • Open Access

    Thiourea-derived g-C3N4 with time-tuned properties for efficient dye degradation and in vitro cytotoxicity evaluation

    by Helly Parmar, Krupa Majethia, Jinal Patel, Devanshi Soni, Jyoti V. Thaikoottathil, Neha Taneja, Arunima Nayak, Syed Shahabuddin, Mohammed E. Ali Mohsin, Suleiman Mousa, et al.

    The online version contains supplementary material available at 10.1038/s41598-026-47485-8.


  • Open Access

    Machine learning-driven performance prediction of Z-scheme g-C3N4/SnS2 heterostructure photocatalyst for complete mineralization of indigo carmine and elucidation of degradation pathways

    by Rama Gaur, Helly Parmar, Jinal Patel, Prajakta Mhaske, Gunjan Pathak, Neha Taneja, Inderjeet Tyagi, Mohammed E. Ali Mohsin, Suleiman Mousa, Syed Shahabuddin

    The extensive use of synthetic dyes in industry has raised environmental concerns due to their high toxicity and persistence in water. In this study, a Z-scheme g-C3N4/SnS2 heterostructure was synthesized via a facile one-pot thermal decomposition method with varying SnS₂ loading. The nanocomposites were thoroughly characterized using XRD, FT-IR, DRS, PL, Raman, XPS, FE-SEM, and TEM to confirm their structural, optical, and morphological structures. The photocatalytic performance was evaluated for indigo carmine degradation under natural sunlight. The nanocomposite GS5 sample (5% SnS₂) showed the highest efficiency, achieving 100% dye removal and 74.1% mineralization (TOC) of 10 ppm dye within 30 min at 1 mg/mL catalyst dosage, and 88.67% removal at 50 ppm dye concentration. The photocatalytic performance of the g-C3N4/SnS2 nanocomposites was evaluated by varying key parameters such as pH, catalyst dosage, dye concentration, and regeneration cycles. Structural and optical analyses confirmed the formation of a well-coupled Z-scheme heterojunction, promoting charge separation and reactive oxygen species generation. The degradation mechanism, supported by GC-MS and scavenger studies, highlighted the dominant role of superoxide radicals. Machine learning models, including Random Forest, ANN, SVM, and XGBoost, successfully predicted photocatalytic efficiency, with Random Forest showing the highest accuracy (R² = 0.9734, error = 6.24). This study highlights the importance of light-driven photocatalysis, efficient Z-scheme heterostructures for improved charge separation, and the limited reports using machine learning with g-C3N4/SnS2. It demonstrates the potential of g-C3N4/SnS2 as a solar-driven photocatalyst for degrading recalcitrant dyes and the role of machine learning in predicting real-world performance.


  • Re‐refining used oil using rosin: A new approach for recycling waste engine oil

    by Krunal Parekh, Rama Gaur, Syed Shahabuddin

    In this study, used lubricant oil was recycled using sulfuric acid, soda ash, rosin, and potash alum. The study found that the physicochemical properties of the recovered oil were closely aligned with the properties of fresh oils, indicating that the recycling process via this modified method was effective. The quality of the recycled oil was assessed using various physio‐chemical tests, which included evaluating its viscosity, density, pour point, and aniline point. The analysis of the density of the used oil revealed a value of 863.54 kg/m 3 , whereas the density of the recovered oil sample showed a decrease to 850.26 kg/m 3 . This implies the treatment process was effective in eliminating the solid heavy impurities from the used oil. Additionally, the chemical composition of the recycled oil was analyzed using Fourier Transform Infrared Spectroscopy (FT‐IR) and UV–Visible spectra, which demonstrated that the composition of the recycled oil was similar to that of fresh oil. The FT‐IR analysis further revealed the presence of oxidized products in the used oil, which contributed to the oil's contamination. However, the UV analysis confirmed that the recycled oil was free from impurities post‐treatment, highlighting the effectiveness of the recycling process.


  • Open Access

    Integration of RNN and CatBoost models in a tea-waste biochar filtration system for toxic organic pollutant removal efficiency prediction

    by Stuti Jha, Rama Gaur, Syed Shahabuddin, Vinay Vakharia, Mohammed E. Ali Mohsin

    Water pollution is a dreadful global crisis undermining the environment and economy. In order to combat this issue, several methods and techniques are adopted for treating the polluted water. Adsorption by biowastes is one of the most economically viable, simple, and effective methods for wastewater treatment. In spite of numerous reports in the literature showing the removal of various pollutants, there is still room for investigation in the field of simultaneous adsorption of varied categories of pollutants. The present study focuses on the simultaneous removal of organic water contaminants like dyes, agrochemicals, and aromatic compounds from wastewater using biochar prepared from tea waste as adsorbent. A detailed investigation on the effect of contact time, pH, dosage, and temperature on the adsorption performance of adsorbent has been carried out. At optimized reaction condition of 5 mg ml−1 of adsorbent dosage at pH 2 for 60 min, 82.66% overall removal was obtained for 40 ppm of pollutant (malachite green, congo red, chlorpyrifos, and 4-nitroaniline) mixture. Further, the percentage removal was predicted using two machine learning (ML) models: CatBoost and Recurrent Neural Network (RNN), with and without Bayesian optimization. The prediction capability of these models was evaluated using three performance metrics: coefficient of determination (R2), Mean Absolute Error (MAE), and Root Mean Square Error (RMSE). Based on the evaluation, RNN was found to be the most effective model for % removal prediction based on higher R2 value of 0.960. Moreover, the fabrication of a portable column filtration device for the removal of coexisting harmful organic pollutants has been demonstrated. The results confirm that tea waste (TW)-derived biochar, coupled with advanced machine learning models, is a promising solution for real-time wastewater treatment.


  • Influence of alkaline activation on the morphology, texture, and CO₂ sorption activity of porous carbon materials

    by Anastasia Memetova, Inderjeet Tyagi, Nariman Memetov, Andrey Zelenin, Dyachkova Tatyana, Gutnik Irina, Saravanan Rajendran, Rama Gaur


  • Open Access

    Designing a Z-scheme rGO–SnS2 synergistic photocatalyst for photocatalytic mineralization of atrazine and 2,4-dichlorophenoxyacetic acid and applying machine learning for predictive modelling of photocatalytic performance

    by Jinal Patel, Megha Parmar, Syed Shahabuddin, Inderjeet Tyagi, Rama Gaur

    The extensive use of agrochemicals for crop protection and quality enhancement has raised environmental concerns due to their negative effects on human health. This study focuses on the design and synthesis of a Z-scheme rGO–SnS2 photocatalyst for wastewater treatment. rGO–SnS2 nanocomposites with varying SnS2 nanoparticle loadings were synthesized using a thermal decomposition method and characterized using various analytical techniques to confirm their composition, phase, structure, morphology, optical properties, and functional groups. The photocatalytic performance of the rGO–SnS2 nanocomposites was evaluated for the degradation of atrazine (ATZ) and 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solutions under natural sunlight. The optimized nanocomposite achieved fast and efficient degradation, with a removal efficiency of 91% for ATZ and 87% for 2,4-D within 3 minutes, compared to only 18% and 26% removal by pure rGO. The study also explored key parameters affecting photocatalytic performance, including catalyst loading, pH, dosage, and regeneration. The degradation pathways and major intermediates of ATZ and 2,4-D were identified using LC-MS analysis, and a detailed reaction mechanism was proposed based on scavenger and mineralization studies. Additionally, machine learning (ML) models, including Gaussian process (GP), artificial neural network (ANN), and support vector machine (SVM), were employed exclusively for predictive analysis of the photocatalytic performance. ANN demonstrated the best predictive capability, with an R2 value of 0.974 and an error of 0.002. This work highlights the potential of rGO–SnS2 nanocomposites as effective photocatalysts for agrochemical mineralization, with ML aiding in performance prediction for real-world applications.


  • Development of MAX-Phase/CdS hybrid nanocomposite as an efficient photocatalyst for industrial wastewater treatment

    by Hemendra Raol, Jinal Patel, Syed Shahabuddin, Inderjeet Tyagi, Suhas, Rama Gaur

    With rapid industrialization and consumerism, production across sectors has surged. The textile and paper industries, lacking proper disposal methods, discharge organic waste into drains and water bodies. This study focuses on developing an effective photocatalyst for degrading toxic dyes in wastewater. MAX-Phase/CdS nanocomposites were synthesized via a thermal decomposition approach at 180°C for 1 h. The synthesized nanocomposites were characterized using XRD, FT-IR, Raman, and FE-SEM analysis. The prepared MAX-Phase/CdS nanocomposites have been explored for the degradation of methylene blue dye in aqueous solution. The MAX-Phase/CdS nanocomposite exhibits 97.8% removal efficiency in 60 min compared to the parent compound. A detailed investigation of the mechanism using scavenger studies. The MAX-Phase/CdS nanocomposite has the scope and potential to be an effective photocatalyst, aligning well with environmental concerns and suitable for industrial implementation.


  • Open Access

    Transforming Biomass Waste into Hydrochars and Porous Activated Carbon: A Characterization Study

    by Suhas, Monika Chaudhary, Shubham Chaudhary, Shivangi Chaubey, Isabel Pestana da Paixão Cansado, Mohammad Hadi Dehghani, Inderjeet Tyagi, Rama Gaur

    Hydrothermal carbonization (HTC) is an environmentally friendly process for transforming biomass into sustainable hydrochar, which is a carbon-rich material with a variety of potential applications. Herein, Tectona grandis seeds (TGs) were transformed into hydrochars using HTC at low temperatures (180–250 °C) and autogenous pressure. The prepared hydrochars were rich in oxygenated functional groups. The optimized hydrochar, HC-230-4 (prepared at 230 °C, for 4 h), presented a ratio of H/C = 0.95 and O/C = 0.29, an improved degree of coalification, and a high heating value (26.53 MJ kg−1), which can replace bituminous coals in the power sector. The prepared hydrochar was further activated in the presence of CO2 to prepare activated carbon (AC). XRD, TGA, FTIR, FE-SEM, and BET techniques were used to characterize raw biomass (TGs), hydrochar, and ACs, to identify the potential applications for the developed materials. BET studies revealed that the hydrochar has limited porosity, with a low surface area (14.41 m2g−1) and porous volume. On the other hand, the derived AC (AC-850-5) has a high surface area (729.70 m2g−1) and appreciable total and microporous volumes (0.392 cm3g−1 and 0.286 cm3g−1). The use of biomass, mainly waste biomass, for the production of carbon-rich materials is an effective strategy for managing and valorizing waste biomass resources, reducing environmental pollution, and improving sustainability, being in line with the principles of circularity.