Development of design technique for vacuum insulation in large size multi-aperture multi-grid accelerator for nuclear fusion
Authors:
- 5 October 2015
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 87 (2) , 02B304
Abstract
Design techniques for the vacuum insulation have been developed in order to realize a reliable voltage holding capability of multi-aperture multi-grid (MAMuG) accelerators for fusion application. In this method, the nested multi-stage configuration of the MAMuG accelerator can be uniquely designed to satisfy the target voltage within given boundary conditions. The evaluation of the voltage holding capabilities of each acceleration stages was based on the previous experimental results about the area effect and the multi-aperture effect. Since the multi-grid effect was found to be the extension of the area effect by the total facing area this time, the total voltage holding capability of the multi-stage can be estimated from that per single stage by assuming the stage with the highest electric field, the total facing area, and the total apertures. By applying these consideration, the analysis on the 3-stage MAMuG accelerator for JT-60SA agreed well with the past gap-scan experiments with an accuracy of less than 10% variation, which demonstrated the high reliability to design MAMuG accelerators and also multi-stage high voltage bushings.Keywords
This publication has 12 references indexed in Scilit:
- Progress in the realization of the PRIMA neutral beam test facilityNuclear Fusion, 2015
- First results of the ITER-relevant negative ion beam test facility ELISE (invited)Review of Scientific Instruments, 2013
- Acceleration of 500 keV Negative Ion Beams By Tuning Vacuum Insulation Distance On JT-60 Negative Ion SourceAIP Conference Proceedings, 2011
- Overview of the JT-60SA projectNuclear Fusion, 2011
- Achievement of 500 keV negative ion beam acceleration on JT-60U negative-ion-based neutral beam injectorNuclear Fusion, 2011
- Achievement and improvement of the JT-60U negative ion source for JT-60 Super Advanced (invited)Review of Scientific Instruments, 2010
- Negative ion source development for fusion application (invited)Review of Scientific Instruments, 2010
- R&D progress of the high power negative ion accelerator for the ITER NB system at JAEANuclear Fusion, 2009
- Status of the ITER heating neutral beam systemNuclear Fusion, 2009
- Progress in the ITER Physics BasisNuclear Fusion, 2007