Existence and Significance of Local Overheating in Spark Plasma Sintered NiAl: Experimental and Numerical Investigation
Open Access
- 20 August 2026
- journal article
- research article
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 57 (11) , 5206-5231
Abstract
This work presents a combined experimental and numerical investigation of local overheating in NiAl during spark plasma sintering (SPS). Experimental studies were conducted on samples sintered under different temperature and pressure conditions to capture both the early and final stages of densification. Both perpendicular and parallel loading directions were analysed for microstructural evidence of local melting. Experimental research comprised post-process analysis using SEM and EBSD, while supplementary XRD analysis was used to assess phase stability and crystallographic characteristics. Microstructural analysis focused on regions most susceptible to overheating (contact areas, small particles trapped between larger ones). Sintered samples showed progressive densification, neck growth and grain coarsening with increasing temperature. EBSD maps of sintered compacts reveal distinct orientations across contacts, with no evidence of epitaxial or equiaxed grain growth. Experimentally, no evidence of melting due to local overheating was detected. The experimental observations were complemented by particle-scale thermo-electric FEM simulations. Geometries of equal-sized particles, arranged in a straight line and in a zig-zag chain, connected by the necks with increased resistance, were considered to analyse the temperature rise in the necks. Geometry consisting of a small particle between two large particles was analysed to assess temperature nonuniformity in heterogeneous microstructures. The results show temperature increase in contacts or in small particles; however, the resulting temperature differences are less than 1 $$^{\circ} $$ C in all cases studied. Numerical results support the experimental findings that NiAl is not prone to local overheating in SPS under the studied conditions.
Keywords
This publication has 58 references indexed in Scilit:
- Discrete element model for effective electrical conductivity of spark plasma sintered porous materialsComputational Particle Mechanics, 2024
- Multiphysics Simulation and Experimental Investigation of the Densification of Metals by Spark Plasma SinteringAdvanced Engineering Materials, 2023
- Combined EBSD and Computer-Assisted Quantitative Analysis of the Impact of Spark Plasma Sintering Parameters on the Structure of Porous MaterialsMetallurgical and Materials Transactions A, 2022
- Stability of crystallographic texture in laser powder bed fusion: Understanding the competition of crystal growth using a single crystalline seedAdditive Manufacturing, 2021
- Spark Plasma Sintering2021
- Spark Plasma Sintering of Ti-48Al-2Cr-2Nb Alloy Powder and Characterization of an Unexpected PhaseJOM, 2019
- Classical Electromagnetism2017
- Field‐Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology DevelopmentsAdvanced Engineering Materials, 2014
- Microstructure Evolution in Nano-reinforced Ferritic Steel Processed By Mechanical Alloying and Spark Plasma SinteringMetallurgical and Materials Transactions A, 2013
- NiAl alloys for high-temperature structural applicationsJOM, 1991