MZMaciej Zietara
Maciej Zietara
*This is an algorithmically generated author record based on publicly available information.
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maciej Zietara has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Adam Kruk
AGH University of Krakow, Kraków, Poland
1 shared publication Aleksandra Czyrska-Filemonowicz
International Centre of Electron Microscopy for Materials Science and Faculty of Metals Engineering and Computer Industrial Science, AGH University of Science and Technology (AGH-UST), Kraków, Poland
1 shared publication- Fatima Nisar
Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland
1 shared publication - Jerzy Rojek
Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland
1 shared publication - Kamil Kaszyca
Lukasiewicz Research Network, Institute of Microelectronics and Photonics, Warsaw, Poland
1 shared publication - Marcin Chmielewski
Łukasiewicz – Institute of Microelectronics and Photonics, Warsaw, Poland
1 shared publication
Latest Publications
- Open Access
- 20 August 2026
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 57 (11) , 5206-5231
Existence and Significance of Local Overheating in Spark Plasma Sintered NiAl: Experimental and Numerical Investigation
This work presents a combined experimental and numerical investigation of local overheating in NiAl during spark plasma sintering (SPS). Experimental studies were conducted on samples sintered under different temperature and pressure conditions to capture both the early and final stages of densification. Both perpendicular and parallel loading directions were analysed for microstructural evidence of local melting. Experimental research comprised post-process analysis using SEM and EBSD, while supplementary XRD analysis was used to assess phase stability and crystallographic characteristics. Microstructural analysis focused on regions most susceptible to overheating (contact areas, small particles trapped between larger ones). Sintered samples showed progressive densification, neck growth and grain coarsening with increasing temperature. EBSD maps of sintered compacts reveal distinct orientations across contacts, with no evidence of epitaxial or equiaxed grain growth. Experimentally, no evidence of melting due to local overheating was detected. The experimental observations were complemented by particle-scale thermo-electric FEM simulations. Geometries of equal-sized particles, arranged in a straight line and in a zig-zag chain, connected by the necks with increased resistance, were considered to analyse the temperature rise in the necks. Geometry consisting of a small particle between two large particles was analysed to assess temperature nonuniformity in heterogeneous microstructures. The results show temperature increase in contacts or in small particles; however, the resulting temperature differences are less than 1 $$^{\circ} $$ C in all cases studied. Numerical results support the experimental findings that NiAl is not prone to local overheating in SPS under the studied conditions.- 20 August 2026
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 57 (11) , 5206-5231
Open AccessExistence and Significance of Local Overheating in Spark Plasma Sintered NiAl: Experimental and Numerical Investigation
This work presents a combined experimental and numerical investigation of local overheating in NiAl during spark plasma sintering (SPS). Experimental studies were conducted on samples sintered under different temperature and pressure conditions to capture both the early and final stages of densification. Both perpendicular and parallel loading directions were analysed for microstructural evidence of local melting. Experimental research comprised post-process analysis using SEM and EBSD, while supplementary XRD analysis was used to assess phase stability and crystallographic characteristics. Microstructural analysis focused on regions most susceptible to overheating (contact areas, small particles trapped between larger ones). Sintered samples showed progressive densification, neck growth and grain coarsening with increasing temperature. EBSD maps of sintered compacts reveal distinct orientations across contacts, with no evidence of epitaxial or equiaxed grain growth. Experimentally, no evidence of melting due to local overheating was detected. The experimental observations were complemented by particle-scale thermo-electric FEM simulations. Geometries of equal-sized particles, arranged in a straight line and in a zig-zag chain, connected by the necks with increased resistance, were considered to analyse the temperature rise in the necks. Geometry consisting of a small particle between two large particles was analysed to assess temperature nonuniformity in heterogeneous microstructures. The results show temperature increase in contacts or in small particles; however, the resulting temperature differences are less than 1 $$^{\circ} $$ C in all cases studied. Numerical results support the experimental findings that NiAl is not prone to local overheating in SPS under the studied conditions. - 8 January 2017
- Published by Springer Nature in Metals and Materials International
- Vol. 23 (1) , 126-131
Characterization of γ and γ′ phases in 2nd and 4th generation single crystal nickel-base superalloys
- 8 January 2017
- Published by Springer Nature in Metals and Materials International
- Vol. 23 (1) , 126-131
Characterization of γ and γ′ phases in 2nd and 4th generation single crystal nickel-base superalloys