Optimized Magnetic Core Layer in Inductive Power Transfer Pad for Electric Vehicle Charging
- 31 July 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (10) , 11964-11973
Abstract
This paper proposes a reduced ferrite IPT system for EV charging using ferrite-based soft magnetic composites (SMCs). IPT pads typically consist of a significant amount of ferrite to improve field shaping for better magnetic coupling between the primary and the secondary pads. However, the costly and brittle nature of ferrite leaves the IPT pads vulnerable to harsh roadway conditions. The IPT pad design in this paper either replaces ferrite with SMCs or removes the ferrite to reduce system cost and improve mechanical robustness. The design methodology uses a genetic algorithm to optimise the geometry of the primary magnetic core layer with a combination of SMC and ferrite using ANSYS Maxwell based on the magnetic coupling, ferrite volume and magnetic leakage fields. The paper experimentally validates the optimised pad that reduces ferrite volume by 63% compared to a typical IPT pad that uses only ferrite. The optimised design has 11% coupling reduction, but also reduces magnetic field leakage by 8%. When considering end-to-end DC-DC efficiency, the reduction with the optimised system is no more than 0.65%. The minimal deterioration is due to the optimised placement of SMC in low B-field regions.Keywords
Funding Information
- New Zealand Ministry of Business, Innovation, and Employment Endeavour Fund (UOAX2101)
This publication has 23 references indexed in Scilit:
- Design Guidelines of Inductive Coils Using a Polymer Bonded Magnetic Composite for Inductive Power Transfer Systems in Electric VehiclesIEEE Transactions on Power Electronics, 2020
- Loss Minimization Design of Ferrite Core in a DD-Coil-Based High-Power Wireless Charging System for Electrical Vehicle ApplicationIEEE Transactions on Transportation Electrification, 2019
- Fast 3-D Optimization of Magnetic Cores for Loss and Volume ReductionIEEE Transactions on Magnetics, 2018
- Multi-Objective Optimization of Circular Magnetic Couplers for Wireless Power Transfer ApplicationsIEEE Transactions on Magnetics, 2017
- Optimization of Magnetic Core Structure for Wireless Charging CouplerIEEE Transactions on Magnetics, 2017
- Tripolar Pad for Inductive Power Transfer Systems for EV ChargingIEEE Transactions on Power Electronics, 2016
- A Parallel Topology for Inductive Power Transfer Power SuppliesIEEE Transactions on Power Electronics, 2014
- Modern Trends in Inductive Power Transfer for Transportation ApplicationsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2013
- Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging SystemsIEEE Transactions on Industrial Electronics, 2011
- Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer SystemsIEEE Transactions on Power Electronics, 2011