Aqueous Tape Casting of Zirconium Diboride
Authors:
- 25 September 2009
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 92 (10) , 2212-2217
Abstract
Aqueous tape casting of ZrB 2 powder with sintering additives was investigated. The dispersion of ZrB 2 suspensions in aqueous media was studied and characterized in terms of zeta potential, sedimentation, and rheological measurements. A well‐stabilized suspension with a high solid content (up to 45 vol%) was prepared in the alkaline pH region with 0.4 wt% Lopon 885 as the dispersant. Several suspensions with different compositions of binder and plasticizer were prepared for comparison. Crack‐free green tapes with a maximum thickness of approximately 250 μm were obtained with a binder content of 18–23 wt%. The green tapes had high qualities, such as homogeneity, good flexibility, and a smooth surface. Results showed that the slurries at selected formulations met the needs of the tape‐casting process.Keywords
This publication has 26 references indexed in Scilit:
- Dispersion of Zirconium Diboride in an Aqueous, High‐Solids PasteInternational Journal of Applied Ceramic Technology, 2007
- Dispersion Behavior of ZrB2 Powder in Aqueous SolutionJournal of the American Ceramic Society, 2007
- Pressureless sintering of carbon-coated zirconium diboride powdersMaterials Science and Engineering: A, 2007
- Aqueous gel-casting of hydroxyapatiteMaterials Science and Engineering: A, 2006
- Properties of a Pressureless‐Sintered ZrB2–MoSi2 Ceramic CompositeJournal of the American Ceramic Society, 2006
- Thermal Shock of Layered Ceramic Structures with Crack‐Deflecting InterfacesJournal of the American Ceramic Society, 2001
- Novel Powder‐Processing Methods for Advanced CeramicsJournal of the American Ceramic Society, 2000
- Adsorption Effects on the Rheological Properties of Aqueous Alumina Suspensions with PolyelectrolyteJournal of the American Ceramic Society, 1998
- A simple way to make tough ceramicsNature, 1990
- Powder Processing Science and Technology for Increased ReliabilityJournal of the American Ceramic Society, 1989