Development by extrusion of composite films based on Poly(Lactic Acid)/Babassu Mesocarp Flour
Authors:
- Lucas Rafael Carneiro da SilvaLSLucas Rafael Carneiro da Silva
- Railha Antunes de FrançaRFRailha Antunes de França
- Raquel Do Nascimento SilvaRSRaquel Do Nascimento Silva
- Tatianny Soares AlvesTATatianny Soares Alves
- Renata BarbosaRBRenata Barbosa
- Alessandro de Oliveira RiosARAlessandro de Oliveira Rios
- Ruth Marlene Campomanes SantanaRSRuth Marlene Campomanes Santana
Open Access
- 1 January 2024
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 34 (1) , e20240009
Abstract
The objective of this manuscript was to investigate the influence of different Babassu Mesocarp Flour (BMF) contents (3, 5, 8, and 10% by weight) on the physical and surface properties of the Poly(Lactic Acid) (PLA) matrix. For this purpose, composite films were produced through flat-die extrusion processing. Visual analysis showed that the films were successfully produced by this processing method and exhibited good handling. The physical properties of the films varied as follows: width (16.41‒20.38 cm), thickness (0.14‒0.24 mm), apparent density (0.78‒1.07 g/cm3), and grammage (168.34‒255.31 g/m2). Through optical microscopy, good distribution and dispersion of the particles were observed despite the presence of some agglomerates. The film surface became rough due to the incorporated flour content, which influenced the contact angle result. The combination of PLA/BMF for producing composite films has technological potential, enabling the valorization of an industrial by-product and preserving the environment.Keywords
This publication has 20 references indexed in Scilit:
- Active Mono-Material Films from Natural and Post-consumer Recycled Polymers with Essential Oils for Food Packaging ApplicationsJournal of Polymers and the Environment, 2023
- Development of Packaging Films With Gas Selective Permeability Based On Poly(butylene Adipate-co-terephthalate)/Poly(butylene Succinate) and Its Application in the Storage of White Mushroom (Agaricus Bisporus)Food and Bioprocess Technology, 2022
- Bio-based films/nanopapers from lignocellulosic wastes for production of added-value micro-/nanomaterialsEnvironmental Science and Pollution Research, 2021
- Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineriesApplied Materials Today, 2021
- An Investigation into the Influence of Filler Piper nigrum Leaves Extract on Physicochemical and Antimicrobial Properties of Chitosan/Poly (Vinyl Alcohol) Blend FilmsJournal of Polymers and the Environment, 2019
- Poly(lactic acid)/coplasticized thermoplastic starch blend: Effect of plasticizer migration on rheological and mechanical propertiesPolymers for Advanced Technologies, 2018
- Observation of the transformation of silica phytoliths into SiC and SiO2 particles in biomass-derived carbons by using SEM/EDS, Raman spectroscopy, and XRDJournal of Materials Science, 2018
- Effect of viscoelastic relaxation modes on stability of extrusion film casting process modeled using multi-mode Phan-Thien-Tanner constitutive equationApplied Mathematical Modelling, 2017
- Pectin-based composite film: Effect of corn husk fiber concentration on their propertiesCarbohydrate Polymers, 2017
- Iodine absorption properties and its effect on the crystallinity of developing wheat starch granulesCarbohydrate Polymers, 2010