Is Recycled Polypropylene Suitable for Flame-Retarded Applications?
Open Access
- 12 June 2026
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (12) , 9332-9341
Abstract
In this study, the performance of an intumescent flame-retardant (IFR) system in recycled polypropylene (PP) was investigated. To this aim, virgin and reprocessed PPs were melt-compounded with 21 wt % of an IFR consisting of piperazine pyrophosphate (PAPP) and melamine polyphosphate (MPP) (2:1 ratio), and the obtained materials were characterized in terms of morphology and rheological and combustion behavior. Cone calorimetry results showed that although both IFR-containing materials exhibited a similar reduction in heat release rate as compared to the unfilled matrices, the recycled PP-based system displayed a higher time to ignition and a pronounced delay in the second heat release rate peak. The observed behavior was explained by considering the formation of a more compact and denser char, likely promoted by the finer dispersion of IFR particles achieved in the low-viscosity recycled PP matrix. Furthermore, both materials achieved a V-0 rating in UL-94 testing and comparable LOI values. Finally, the assessment of the mechanical behavior of both systems demonstrated that the utilization of recycled PP does not compromise the tensile and flexural strength of the material, notwithstanding a slight decrease in ductility as compared to the virgin PP-based counterpart. Overall, these findings demonstrate that recycled PP can be effectively used in flame-retardant formulations, broadening its potential applications while reducing dependence on virgin materials and supporting the development of circular economy approaches.Keywords
Funding Information
- Ministero dell’Istruzione, dell’Università e della Ricerca
- European Regional Development Fund (PE00000004)
This publication has 39 references indexed in Scilit:
- Application of a piperazine pyrophosphate intumescent flame retardant in thin‐walled glass fiber‐reinforced polypropylene materialsJournal of Applied Polymer Science, 2023
- The piperazine pyrophosphate intumescent flame retardant of polypropylene composites prepared by selective laser sinteringPolymer Composites, 2022
- Evaluation of condensed phase: Char/residue analysis2022
- Flame retardancy, thermal properties, and combustion behaviors of intumescent flame‐retardant polypropylene containing (poly) piperazine pyrophosphate and melamine polyphosphatePolymers for Advanced Technologies, 2020
- Synthesis and application of a triazine derivative containing boron as flame retardant in epoxy resinsArabian Journal of Chemistry, 2020
- Impact of selective dispersion of intumescent flame retardant on properties of polypropylene blendsJournal of Materials Science, 2016
- Influence of morphology and ammonium polyphosphate dispersion on the flame retardancy of polystyrene/nylon‐6 blendsFire and Materials, 2013
- Influence of the Recycling Process on the Fire‐Retardant Properties of PP/EPR BlendsMacromolecular Materials and Engineering, 2011
- Development of fire‐retarded materials—Interpretation of cone calorimeter dataFire and Materials, 2007
- Performance and mechanisms of fire retardants in polymers—A reviewPolymer Degradation and Stability, 1988