High‐Q Narrowband Filter Realized by CNC Fabrication With Low Frequency Offset

Authors:

Abstract
A high Q narrowband THz bandpass filter structure for computer numerical control (CNC) milling is proposed in this letter. The proposed filter employs a TM330 rectangular over‐mode cavity (ROMC) to lift the mode degeneracy. By introducing a novel coupling structure and feeding scheme, the target mode is decoupled and reconstructed, thereby achieving spurious suppression in the stopband while mitigating the impact of CNC fabrication tolerances on the center frequency shift. The results indicate that the proposed filter has a fractional bandwidth (FBW) of 0.23% at the center frequency of 220.5 GHz. The fabricated filter demonstrates an insertion loss (IL) of 2.8 dB, a return loss (RL) of 17 dB with the passband, and a center frequency offset as low as 200 MHz. The unloaded Q factor ( Q u ) extracted from the measurement results can reach 1500. This is the terahertz bandpass narrowband filter with the smallest fractional bandwidth, the smallest frequency offset under the same standard definition, and the highest unloaded Q factor among reported literature at present. The design structure of this work has application potential for low‐cost, modular high‐frequency high‐ Q narrowband filter design.
Funding Information
  • National Key Research and Development Program of China (2023YFB3207801)
  • National Natural Science Foundation of China (12327808)

This publication has 11 references indexed in Scilit: