Flexural Performance of Hybrid Engineered Cementitious Composite Layered Reinforced Concrete Beams
Open Access
- 1 June 2018
- journal article
- research article
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
- Vol. 62 (4) , 921-929
Abstract
This paper presents the experimental investigation to evaluate the flexural performance of newly developed hybrid Engineered Cementitious Composite (ECC) layer at tension zone around the main reinforcement of beam. Four different ECC mixes are used in the beam to evaluate the flexural performance, hybrid ECC based on the low modulus poly vinyl alcohol (PVA) and high modulus steel short random fibre reinforcement. The aim of hybridation is to improve the flexural, energy absorption and ductility performance of reinforced concrete beams. In addition to the compressive strength, young’s modulus, uniaxial tensile strength and bond strength of ECC mixes are determined. ECC with PVA fibre with 2.0% volume fraction mix is kept as reference mix, hybridation is made with PVA (1.35%) and steel (0.65%), PVA (1.00%) and steel (1.00%) and finally with PVA (0.65%) and steel (1.35%). This hybridization has a remarkable achievement in mechanical properties and in the flexural behavior in ECC layered RC beam. From the results, it has been observed that mono fiber ECC reinforced with PVA of 2.0% and hybrid fiber ECC reinforced with 1.35 % of PVA fiber and 0.65% of steel fiber has reasonable flexural characteristics than the conventional beam.Keywords
This publication has 25 references indexed in Scilit:
- Observation of steel fibres in concrete with Computed TomographyConstruction and Building Materials, 2017
- Behaviour of reinforced concrete beams with SIFCON at various locations in the beamKSCE Journal of Civil Engineering, 2017
- Fibers and fiber cocktails to improve fire resistance of concreteJournal of Thermal Analysis and Calorimetry, 2016
- Shear Resistance Evaluation of Strain-Hardening Cementitious Composites MemberInternational Journal of Civil Engineering, 2016
- Lateral Resistance of Unreinforced Masonry Walls Strengthened With Engineered Cementitious CompositeInternational Journal of Civil Engineering, 2016
- Study on fiber hybridization effect of engineered cementitious composites with low- and high-modulus polymeric fibersConstruction and Building Materials, 2016
- Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)Construction and Building Materials, 2015
- Material properties of a new hybrid fibre-reinforced engineered cementitious compositeConstruction and Building Materials, 2013
- Effects of fibre type and matrix structure on the mechanical performance of self-compacting micro-concrete compositesCement and Concrete Research, 2009
- Engineered cementitious composites for effective FRP-strengthening of RC beamsComposites Science and Technology, 2005