Effects of the Microstructure and Strengthening Mechanisms of Mo2C Powders Being Added to Ti-8Nb-4Co Alloy Via the Vacuum Sintering Process
Open Access
- 18 December 2023
- journal article
- research article
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 68 (4) , 1255-1265
Abstract
This study utilizes Ti-8Nb-4Co alloys added to different proportions of Mo2C powders (1, 3, and 5 mass%) by the vacuum sintering process of powder metallurgy and simultaneously vacuum sinters the alloys at 1240, 1270, 1300, and 1330°C for 1 h, respectively. The experimental results indicate that when 3 mass% Mo2C powders were added to the Ti-8Nb-4Co alloys, the specimens possessed the optimal mechanical properties after sintering at 1300°C for 1 h. The relative density was 98.02%, and the hardness and TRS were enhanced to 69.6 HRA and 1816.7 MPa, respectively. In addition, the microstructure of vacuum sintered Ti-8Nb-4Co-3Mo2C alloys has both α and β-phase structures, as well as TiC precipitates. EBSD results confirm that the Mo 2C in situ produced TiC during the sintering process and was uniformly dispersed in the grain boundary. Moreover, the reduced molybdenum atom acted as a β-phase stabilizing element and solid-solution in the titanium matrix.Keywords
This publication has 10 references indexed in Scilit:
- In-situ synchrotron radiation study of the aging response of Ti-6Al-4V alloy with different starting microstructuresMaterials Characterization, 2020
- New insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot workingMaterials Characterization, 2020
- Microstructure and Mechanical Properties of Ti-Nb Alloys Prepared by Mechanical Alloying and Spark Plasma SinteringJournal of Materials Engineering and Performance, 2019
- Microstructure and mechanical properties of novel β-type Ti–Co–Zr alloys with high specific strengthMaterials Research Express, 2019
- Mechanical properties and electrochemical behavior of porous Ti-Nb biomaterialsJournal of the Mechanical Behavior of Biomedical Materials, 2018
- Metallurgical properties and biomimetic HA deposition performance of Ti-Nb PIM alloysJournal of Alloys and Compounds, 2018
- Assessment of Ti–16Nb–xZr alloys produced via PIM for implant applicationsJournal of Thermal Analysis and Calorimetry, 2017
- Synthesis of Fine Mo2C Powder from Prereduced Mo in Undiluted CH4 FlowJOM, 2017
- Study on Reduction of MoO 2 Powders with CO to Produce Mo 2 CJournal of the American Ceramic Society, 2015
- The thermochemistry of transition metal carbidesOxidation of Metals, 1979