Effects of prosthesis alignment on pressure distribution at the stump/socket interface in transtibial amputees during unsupported stance and gait
Authors:
- H A M SeelenHSH A M Seelen
- H M H JanssenHJH M H Janssen
- 1 November 2003
- journal article
- research article
- Published by SAGE Publications in Clinical Rehabilitation
- Vol. 17 (7) , 787-796
Abstract
Objective: To assess the effects of antero-posterior realignment of the prosthesis on pressure distribution at the stump/socket interface in unilateral transtibial amputees during unsupported stance and gait. Design: Cross-sectional group study. Setting: Outpatient rehabilitation clinic. Subjects: Seventeen unilateral transtibial amputees. Intervention: Antero-posterior prosthesis realignment using 0.5 cm heel or forefoot wedging. Measures: Pressure distribution changes at several sites at the stump/socket interface, expressed as peak pressure, peak pressure time, sustained submaximal load (MP80+) and time period of MP80+ (TP80+). Results: During stance, heel wedging led to a 30.4% decrease in mean pressure near the patella tendon and a 40.0% increase near the distal tibia site, whereas forefoot wedging led to a 30.0% decrease in pressure in the tibial end region. Antero-posterior ankle realignment did not lead to significant changes near the fibular head. During gait only heel wedging led to a 11.5% increase in peak pressure in the tibia end region. Mean peak pressure time increased 22.7% using heel wedging and decreased 8.8% using forefoot wedging. MP80+ increased 23.8% in the tibia end region during heel wedging and 17.0% in the subpatellar region during forefoot wedging. Conclusions: Antero-posterior realignment of the ankle joint led to an inverse loading and unloading of the subpatellar region versus tibial end region. However, results indicate that stump/socket interface pressure during stance seems not to be highly predictive as to pressure behaviour during gait. Ankle joint realignment led to significant differences in temporal sequences of tissue (un-)loading in the subpatellar area during gait.Keywords
This publication has 6 references indexed in Scilit:
- Socket/stump interface dynamic pressure distributions recorded during the prosthetic stance phase of gait of a trans-tibial amputee wearing a hydrocast socketProsthetics and Orthotics International, 1999
- Interface pressures and shear stressesProsthetics and Orthotics International, 1999
- Clinical investigation of the pressure and shear stress on the trans-tibial stump with a prosthesisMedical Engineering & Physics, 1998
- Effects of alignment changes on stance phase pressures and shear stresses on transtibial amputees: measurements from 13 transducer sitesIEEE Transactions on Rehabilitation Engineering, 1998
- Calibration problems encountered while monitoring stump/socket interface pressures with force sensing resistorsProsthetics and Orthotics International, 1997
- Triaxial force transducer for investigating stresses at the stump/socket interfaceMedical & Biological Engineering & Computing, 1992