Abstract
Analysis of theoretical and experimental studies of the hydraulic pulse drive of technological vibration and vi-bration-impact machines (vibratory cutting and deformation strengthening of machine part surfaces, hydro-pulse vibrators, etc.) showed that the hydro-pulse drive allows for the implementation of various vibration technologies in a wide range of technical applications and with adjustable vibration loads on objects of technological influence. Based on the results of a theoretical study of existing designs of vibration press equipment based on a hydraulic pulse drive, a schematic and structural diagram of a hydraulic pulse vibration press with a two-stage five-line pressure pulse generator with parametric control of its second cascade and an executive link with a drive of the vibrating table of the vibropress from a piston hydraulic cylinder and a load of the object of technological influence of the hydraulic pulse drive from a plunger hydraulic cylinder, the body of which is installed on the architrave of the vibrating press, and the plunger is kinematically connected to the movable crossbeam of the vibrating press. The article presents a description of the operation of a newly developed design of a hydraulic pulse vibrating press with a two-stage five-line pressure pulse generator with parametric control of its second stage, and provides the main calculation dependencies according to which the main geometric and force parameters of the developed drive design can be calculated. This design solution expands the technical and technological capabilities of the hydraulic pulse drive, as it provides a high-speed mode of vibration movement of the executive link – the vibration table of the vibration press in combination with the hydraulic load of the object of technological influence from an additional plunger hydraulic cylinder installed on the architrave of the vibration press, the plunger of which drives the movable crossbeam of the vibration press.