Synthesis of starch-derived biopolymer reinforced Enset fiber green composite packaging films: Processes and properties optimization
Open Access
- 1 January 2023
- journal article
- research article
- Published by SAGE Publications in Composites and Advanced Materials
- Vol. 32
Abstract
The use and disposal of traditional fiber-reinforced polymer composites is an important environmental challenge as one of the factors contributing to worsening climate change. The primary objective of this research is to synthesize thermoplastic starch (TPS) from edible banana skins which can potentially be used as a matrix to produce bio-composite films. For the synthesis of TPS, the preparation of banana peels was performed followed by plasticization to obtain the banana peels TPS. For bio-composite film fabrication, the TPS was mixed with short false banana fibers (FBF) (10–30% by weight of the film) with an electronic blender to form a uniform dispersion of the fibers in the TPS. The FBF/TPS blend was applied uniformly on the surface of the rectangular metal mold. The autoclave method has been adopted for curing and molding the bio-composite film. Then, it was hot pressed varying the temperature and pressure from 131–141 OC to 3–6 MPa, respectively, to obtain the final cured film. The specimen was then solidified or hardened at ambient temperature. Finally, optimization of process parameters, fiber content, and their interaction effects on the tear strength, tensile strength, and bending modulus of the bio composite films were conducted using response surface methodology. The results indicate that both the effects of one factor and the interaction of factors have a significant effect on the mechanical properties of composite films. The optimum processing parameters for TPS production are a temperature of 50 OC and a drying time of 24 h. The optimal result indicates that, at 30% fiber loading, the optimum processing temperature and pressure are 135.14°C and 4.33 MPa, respectively, resulting in a composite film with good mechanical properties.Keywords
This publication has 52 references indexed in Scilit:
- The Preparation and Characterization of Silk/Gelatin BiocompositesPolymer-Plastics Technology and Engineering, 2010
- Studies of the processing and characterization of corn starch and its composites with banana and sugarcane fibers from BrazilCarbohydrate Polymers, 2010
- Thermoset matrix reinforced with sisal fibers: Effect of the cure cycle on the properties of the biobased compositePolymer Testing, 2009
- Effect of temperature and pressure of hot pressing on the mechanical properties of PP–HA bio-compositesMaterials & Design (1980-2015), 2009
- Nanocomposite Edible Films from Mango Puree Reinforced with Cellulose NanofibersJournal of Food Science, 2009
- Biocomposites based on Alfa fibers and starch‐based biopolymerPolymers for Advanced Technologies, 2008
- Effect of chemical modification on properties of hybrid fiber biocompositesComposites Part A: Applied Science and Manufacturing, 2008
- Processing and Mechanical Properties of Natural Fiber Reinforced Thermoplastic Starch BiocompositesJournal of Thermoplastic Composite Materials, 2007
- Thermoplastic starch–cellulosic fibers composites: preliminary resultsCarbohydrate Polymers, 2001
- Predicting and determining the bending stiffness of thin films and laminatesPackaging Technology and Science, 2001