Adane Dagnaw Gudayu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Adane Dagnaw Gudayu has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Dieter Meiners
Institute of Polymer Materials and Plastics Engineering, Clausthal University of Technology, Clausthal-Zellerfeld, Germany
4 shared publicationsLeif Steuernagel
Institute of Polymer Materials and Plastics Engineering, Clausthal University of Technology, Clausthal-Zellerfeld, Germany
4 shared publications- Bekinew Kitaw Dejene
Department of Textile Engineering, Institute of Technology, Hawassa University, Hawassa, Ethiopia
3 shared publications Rotich Gideon
Ethiopian Institute of Textile and Fashion Technology (EiTEX), Bahir Dar University, Bahir Dar, Ethiopia
2 shared publicationsAbdella Simegnaw Ahmed
Bahir Dar University
1 shared publicationAbdella Simegnaw Ahmmed
Ethiopian Institute of Textile and Fashion Technologies, Bahir Dar University, Ethiopia
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Polymer Science
- Vol. 2026 (1)
Towards Sustainable Building Materials: Enset Fiber–Reinforced Recycled HDPE Composites for Wall Tile Applications
This research investigates the development of ecofriendly wall tile composites by incorporating alkali‐treated enset fibers into recycled high‐density polyethylene (rHDPE). The aim is to explore the influence of fiber loading, length, and processing pressure on the mechanical, thermal, and water absorption properties of the composites. The findings demonstrate that optimized composite properties were achieved with 23.28% fiber loading, 22.27 mm fiber length, and 11.17 MPa compressive pressure. The maximum tensile strength of 49.79 N/mm 2 , the flexural strength of 50.44 N/mm 2 , and the hardness of 63.04 were obtained. Water absorption increased with fiber loading but decreased with higher processing pressure. Thermal expansion exhibited an inverse relationship with fiber loading. This study highlights the potential of utilizing agricultural waste (enset fiber) to reinforce recycled plastics, offering a sustainable solution for plastic waste management while enhancing the mechanical performance of the resulting composite wall tiles. This approach promotes environmental sustainability, improves the agroeconomic sector, and contributes to the development of ecoconscious building materials.
- 1 January 2026
- Published by Wiley in International Journal of Polymer Science
- Vol. 2026 (1)
Open AccessTowards Sustainable Building Materials: Enset Fiber–Reinforced Recycled HDPE Composites for Wall Tile Applications
This research investigates the development of ecofriendly wall tile composites by incorporating alkali‐treated enset fibers into recycled high‐density polyethylene (rHDPE). The aim is to explore the influence of fiber loading, length, and processing pressure on the mechanical, thermal, and water absorption properties of the composites. The findings demonstrate that optimized composite properties were achieved with 23.28% fiber loading, 22.27 mm fiber length, and 11.17 MPa compressive pressure. The maximum tensile strength of 49.79 N/mm 2 , the flexural strength of 50.44 N/mm 2 , and the hardness of 63.04 were obtained. Water absorption increased with fiber loading but decreased with higher processing pressure. Thermal expansion exhibited an inverse relationship with fiber loading. This study highlights the potential of utilizing agricultural waste (enset fiber) to reinforce recycled plastics, offering a sustainable solution for plastic waste management while enhancing the mechanical performance of the resulting composite wall tiles. This approach promotes environmental sustainability, improves the agroeconomic sector, and contributes to the development of ecoconscious building materials.
- 29 November 2025
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 36 (12)
Boric Acid as a Flame Retardant for Banana Fiber/Polyester Composites
This study developed fire‐retardant composites using pseudo stem banana fiber‐reinforced unsaturated polyester with boric acid, offering a novel approach to enhancing flame retardancy. Banana fibers, mechanically extracted and alkali‐treated (5%), were processed into twisted yarn (woven structures) and chopped fibers. Composites were fabricated via hand lay‐up using orthophthalic resin and varying boric acid concentrations. Tensile strength, limited oxygen index (LOI), and thermogravimetric behavior were assessed. Woven composites with 15% boric acid exhibited 24.18 MPa tensile strength, below untreated counterparts (28.74 MPa). Increasing boric acid to 20% in chopped fiber composites elevated LOI from 18.7% to 28.5% (untreated: 18%), attributed to enhanced char formation. Thermogravimetric analysis (TGA) showed 20% boric acid‐treated composites (chopped and woven) resisted thermal decomposition. However, woven structures demonstrated uneven resin distribution, reducing fire‐retardant penetration and accelerating decomposition compared to chopped fibers. While boric acid lowered mechanical properties, composites retained sufficient thermal stability for light construction, furniture, and decorative panels, serving as eco‐friendly alternatives to synthetic materials. The study underscores a viable balance between fire retardancy and structural performance, positioning banana fiber‐boric acid composites as sustainable solutions for nonload‐bearing applications.
- 29 November 2025
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 36 (12)
Boric Acid as a Flame Retardant for Banana Fiber/Polyester Composites
This study developed fire‐retardant composites using pseudo stem banana fiber‐reinforced unsaturated polyester with boric acid, offering a novel approach to enhancing flame retardancy. Banana fibers, mechanically extracted and alkali‐treated (5%), were processed into twisted yarn (woven structures) and chopped fibers. Composites were fabricated via hand lay‐up using orthophthalic resin and varying boric acid concentrations. Tensile strength, limited oxygen index (LOI), and thermogravimetric behavior were assessed. Woven composites with 15% boric acid exhibited 24.18 MPa tensile strength, below untreated counterparts (28.74 MPa). Increasing boric acid to 20% in chopped fiber composites elevated LOI from 18.7% to 28.5% (untreated: 18%), attributed to enhanced char formation. Thermogravimetric analysis (TGA) showed 20% boric acid‐treated composites (chopped and woven) resisted thermal decomposition. However, woven structures demonstrated uneven resin distribution, reducing fire‐retardant penetration and accelerating decomposition compared to chopped fibers. While boric acid lowered mechanical properties, composites retained sufficient thermal stability for light construction, furniture, and decorative panels, serving as eco‐friendly alternatives to synthetic materials. The study underscores a viable balance between fire retardancy and structural performance, positioning banana fiber‐boric acid composites as sustainable solutions for nonload‐bearing applications.
- 20 October 2024
- Published by Taylor & Francis in Composite Interfaces
- Vol. 32 (3) , 363-397
Natural fiber reinforced cementitious composites; materials, compatibility issues and future perspectives
- 20 October 2024
- Published by Taylor & Francis in Composite Interfaces
- Vol. 32 (3) , 363-397
Natural fiber reinforced cementitious composites; materials, compatibility issues and future perspectives
- 7 October 2024
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 38 (6) , 2138-2168
Achieving performance and functionality in PLA-based packaging: Insights from hybrid composites with false banana (Enset) fiber and ZnO nanoparticles
The use of poly(lactic acid) (PLA)-based composites reinforced with natural fibers is becoming increasingly popular in sustainable packaging. However, these materials often lack adequate barriers and desirable functional properties. Concurrently, zinc oxide nanoparticles (ZnO NPs) have been incorporated into PLA-based composites to develop functional packaging films. Despite this progress, there is a gap in the literature regarding packaging materials that require both functional and performance properties, specifically those that combine natural fibers and ZnO NPs within the PLA matrix. This study aims to develop and optimize the effects of ZnO nanofillers and false banana, also called Enset fibers (EFs) as hybrid reinforcements in PLA matrices. A central composite design (CCD) approach was used to evaluate the effects of EFs at three levels (5 %, 15 %, and 25 % w/w) and ZnO NPs at three levels (0 %, 5 %, and 10 % w/w) on the performance (tensile and flexural strength) and functional properties (water and antibacterial activity) of the resulting nanocomposite materials. The findings indicate that the inclusion of ZnO NPs significantly enhanced both the performance and functional properties of the nanocomposites, whereas the inclusion of EFs improved the performance properties but reduced the functional properties of the nanocomposites. Ultimately, this study identified an optimal formulation for producing durable and functional composites for various packaging applications.
- 7 October 2024
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 38 (6) , 2138-2168
Achieving performance and functionality in PLA-based packaging: Insights from hybrid composites with false banana (Enset) fiber and ZnO nanoparticles
The use of poly(lactic acid) (PLA)-based composites reinforced with natural fibers is becoming increasingly popular in sustainable packaging. However, these materials often lack adequate barriers and desirable functional properties. Concurrently, zinc oxide nanoparticles (ZnO NPs) have been incorporated into PLA-based composites to develop functional packaging films. Despite this progress, there is a gap in the literature regarding packaging materials that require both functional and performance properties, specifically those that combine natural fibers and ZnO NPs within the PLA matrix. This study aims to develop and optimize the effects of ZnO nanofillers and false banana, also called Enset fibers (EFs) as hybrid reinforcements in PLA matrices. A central composite design (CCD) approach was used to evaluate the effects of EFs at three levels (5 %, 15 %, and 25 % w/w) and ZnO NPs at three levels (0 %, 5 %, and 10 % w/w) on the performance (tensile and flexural strength) and functional properties (water and antibacterial activity) of the resulting nanocomposite materials. The findings indicate that the inclusion of ZnO NPs significantly enhanced both the performance and functional properties of the nanocomposites, whereas the inclusion of EFs improved the performance properties but reduced the functional properties of the nanocomposites. Ultimately, this study identified an optimal formulation for producing durable and functional composites for various packaging applications.
- 27 May 2024
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 63 (12) , 1645-1681
Eco-Friendly Packaging Innovations: Integrating Natural Fibers and ZnO Nanofillers in Polylactic Acid (PLA) Based Green Composites - A Review
- 27 May 2024
- Published by Taylor & Francis in Polymer-Plastics Technology and Materials
- Vol. 63 (12) , 1645-1681
Eco-Friendly Packaging Innovations: Integrating Natural Fibers and ZnO Nanofillers in Polylactic Acid (PLA) Based Green Composites - A Review
- Open Access
- 9 May 2024
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 54
Exploring the potential of 3D woven and knitted spacer fabrics in technical textiles: A critical review
Three-dimensional (3D) woven and knitted spacer fabrics have emerged as significant advancements in the field of technical textiles, driven by notable progress made by the textile industry. These unique fabrics possess desirable characteristics that render them suitable for various technical applications. As we look towards the future, spacer fabrics are expected to find innovative applications in various functional products. However, despite the growing interest in their use in the technical textile sector, comprehensive reviews exploring their potential are lacking. Therefore, this review aims to fill this gap in the existing literature by examining the potential of 3D woven and knitted spacer fabrics in technical textiles. It provides a comprehensive exploration of their fabrication techniques, properties, key parameters, and potential applications in technical textiles. This review highlights that woven spacer fabrics exhibit high integrity and stability, making them suitable for composite reinforcement. On the other hand, knitted spacer fabrics offer a higher air-trapping capacity and a double-faced nature, leading to their extensive use in cushions, medical textiles, and protective technical textiles. Additionally, this review provides valuable insights for researchers and manufacturers interested in harnessing the potential of spacer fabrics for various functional products in the field of technical textiles.
- 9 May 2024
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 54
Open AccessExploring the potential of 3D woven and knitted spacer fabrics in technical textiles: A critical review
Three-dimensional (3D) woven and knitted spacer fabrics have emerged as significant advancements in the field of technical textiles, driven by notable progress made by the textile industry. These unique fabrics possess desirable characteristics that render them suitable for various technical applications. As we look towards the future, spacer fabrics are expected to find innovative applications in various functional products. However, despite the growing interest in their use in the technical textile sector, comprehensive reviews exploring their potential are lacking. Therefore, this review aims to fill this gap in the existing literature by examining the potential of 3D woven and knitted spacer fabrics in technical textiles. It provides a comprehensive exploration of their fabrication techniques, properties, key parameters, and potential applications in technical textiles. This review highlights that woven spacer fabrics exhibit high integrity and stability, making them suitable for composite reinforcement. On the other hand, knitted spacer fabrics offer a higher air-trapping capacity and a double-faced nature, leading to their extensive use in cushions, medical textiles, and protective technical textiles. Additionally, this review provides valuable insights for researchers and manufacturers interested in harnessing the potential of spacer fabrics for various functional products in the field of technical textiles.
- 24 February 2024
- Published by SAGE Publications in Textile Research Journal
- Vol. 94 (13-14) , 1459-1469
Electrical and electrothermal characterization of silver-coated Vectran and Amberstrand yarns for wearable heating
The development and manufacturing of conductive fibers, yarns, and fabrics is increasing exponentially due to their multiple applications in wearable electronic textiles in sensors, actuators, data processing, communication, and energy storage. This paper investigated the electrical and electrothermal properties of Liberator 40 yarns and Amberstrand 166 conductive yarns for application in wearable heating textiles. The aim of the study was to find a flexible material for protective wearable resistive heating cloths in cold environments. The analytical results demonstrate that the Liberator 40 conductive yarn gave better heating performance than the Amberstrand 166 conductive yarn due to its electrothermal characteristics. In addition, Liberator 40 conductive yarn had higher long-term durability, washing resistance, and thermal stability than Amberstrand 166 conductive yarn. The average surface temperature of both the Liberator 40 and Amberstrand 166-based wearable heating fabrics was 40°C and 34.5°C at a 9 V DC power supply, respectively. Therefore, both the conductive yarns are suitable to be applied as resistive heating elements for localized wearable heating textiles.
- 24 February 2024
- Published by SAGE Publications in Textile Research Journal
- Vol. 94 (13-14) , 1459-1469
Electrical and electrothermal characterization of silver-coated Vectran and Amberstrand yarns for wearable heating
The development and manufacturing of conductive fibers, yarns, and fabrics is increasing exponentially due to their multiple applications in wearable electronic textiles in sensors, actuators, data processing, communication, and energy storage. This paper investigated the electrical and electrothermal properties of Liberator 40 yarns and Amberstrand 166 conductive yarns for application in wearable heating textiles. The aim of the study was to find a flexible material for protective wearable resistive heating cloths in cold environments. The analytical results demonstrate that the Liberator 40 conductive yarn gave better heating performance than the Amberstrand 166 conductive yarn due to its electrothermal characteristics. In addition, Liberator 40 conductive yarn had higher long-term durability, washing resistance, and thermal stability than Amberstrand 166 conductive yarn. The average surface temperature of both the Liberator 40 and Amberstrand 166-based wearable heating fabrics was 40°C and 34.5°C at a 9 V DC power supply, respectively. Therefore, both the conductive yarns are suitable to be applied as resistive heating elements for localized wearable heating textiles.
- Open Access
- 1 January 2023
- Published by SAGE Publications in Composites and Advanced Materials
- Vol. 32
Synthesis of starch-derived biopolymer reinforced Enset fiber green composite packaging films: Processes and properties optimization
The use and disposal of traditional fiber-reinforced polymer composites is an important environmental challenge as one of the factors contributing to worsening climate change. The primary objective of this research is to synthesize thermoplastic starch (TPS) from edible banana skins which can potentially be used as a matrix to produce bio-composite films. For the synthesis of TPS, the preparation of banana peels was performed followed by plasticization to obtain the banana peels TPS. For bio-composite film fabrication, the TPS was mixed with short false banana fibers (FBF) (10–30% by weight of the film) with an electronic blender to form a uniform dispersion of the fibers in the TPS. The FBF/TPS blend was applied uniformly on the surface of the rectangular metal mold. The autoclave method has been adopted for curing and molding the bio-composite film. Then, it was hot pressed varying the temperature and pressure from 131–141 OC to 3–6 MPa, respectively, to obtain the final cured film. The specimen was then solidified or hardened at ambient temperature. Finally, optimization of process parameters, fiber content, and their interaction effects on the tear strength, tensile strength, and bending modulus of the bio composite films were conducted using response surface methodology. The results indicate that both the effects of one factor and the interaction of factors have a significant effect on the mechanical properties of composite films. The optimum processing parameters for TPS production are a temperature of 50 OC and a drying time of 24 h. The optimal result indicates that, at 30% fiber loading, the optimum processing temperature and pressure are 135.14°C and 4.33 MPa, respectively, resulting in a composite film with good mechanical properties.
- 1 January 2023
- Published by SAGE Publications in Composites and Advanced Materials
- Vol. 32
Open AccessSynthesis of starch-derived biopolymer reinforced Enset fiber green composite packaging films: Processes and properties optimization
The use and disposal of traditional fiber-reinforced polymer composites is an important environmental challenge as one of the factors contributing to worsening climate change. The primary objective of this research is to synthesize thermoplastic starch (TPS) from edible banana skins which can potentially be used as a matrix to produce bio-composite films. For the synthesis of TPS, the preparation of banana peels was performed followed by plasticization to obtain the banana peels TPS. For bio-composite film fabrication, the TPS was mixed with short false banana fibers (FBF) (10–30% by weight of the film) with an electronic blender to form a uniform dispersion of the fibers in the TPS. The FBF/TPS blend was applied uniformly on the surface of the rectangular metal mold. The autoclave method has been adopted for curing and molding the bio-composite film. Then, it was hot pressed varying the temperature and pressure from 131–141 OC to 3–6 MPa, respectively, to obtain the final cured film. The specimen was then solidified or hardened at ambient temperature. Finally, optimization of process parameters, fiber content, and their interaction effects on the tear strength, tensile strength, and bending modulus of the bio composite films were conducted using response surface methodology. The results indicate that both the effects of one factor and the interaction of factors have a significant effect on the mechanical properties of composite films. The optimum processing parameters for TPS production are a temperature of 50 OC and a drying time of 24 h. The optimal result indicates that, at 30% fiber loading, the optimum processing temperature and pressure are 135.14°C and 4.33 MPa, respectively, resulting in a composite film with good mechanical properties.
- Open Access
- 1 January 2022
- Published by SAGE Publications in Composites and Advanced Materials
- Vol. 31
The capability of ABAQUS/CAE to predict the tensile properties of sisal fiber reinforced polyethylene terephthalate composites
Plastics reinforced by natural fibers attract growing attention, particularly in the automotive industry. The properties and performance of these composites are usually determined before application. However, many mechanical tests of composite materials are destructive, expensive, time-consuming, and can cause operator fatigue. The objective of this research is to model the tensile properties of sisal fiber reinforced polyethylene terephthalate (PET) composites and compare the model outcomes with the results of experimental tests. For the experiment, PET was reinforced with 25% wt. of sisal fiber and composite samples were produced by compounding and injection molding processes. Modeling and simulation have also been carried out with ABAQUS/CAE software. The outputs on the tensile properties of the experiment and the model were statistically compared to see the accuracy of the model against the experimental results. The two-sample t-test indicates that, at 95% confidence interval, the mean differences for the stress, strain, and modulus for the experimental tests and the model results are not significantly different from zero. The research shows that the experiment can be effectively modeled with ABAQUS-based modeling and simulation techniques by linking with appropriate mathematical predictive models.
- 1 January 2022
- Published by SAGE Publications in Composites and Advanced Materials
- Vol. 31
Open AccessThe capability of ABAQUS/CAE to predict the tensile properties of sisal fiber reinforced polyethylene terephthalate composites
Plastics reinforced by natural fibers attract growing attention, particularly in the automotive industry. The properties and performance of these composites are usually determined before application. However, many mechanical tests of composite materials are destructive, expensive, time-consuming, and can cause operator fatigue. The objective of this research is to model the tensile properties of sisal fiber reinforced polyethylene terephthalate (PET) composites and compare the model outcomes with the results of experimental tests. For the experiment, PET was reinforced with 25% wt. of sisal fiber and composite samples were produced by compounding and injection molding processes. Modeling and simulation have also been carried out with ABAQUS/CAE software. The outputs on the tensile properties of the experiment and the model were statistically compared to see the accuracy of the model against the experimental results. The two-sample t-test indicates that, at 95% confidence interval, the mean differences for the stress, strain, and modulus for the experimental tests and the model results are not significantly different from zero. The research shows that the experiment can be effectively modeled with ABAQUS-based modeling and simulation techniques by linking with appropriate mathematical predictive models.
- Open Access
- 1 January 2022
- Published by SAGE Publications in Polymers and Polymer Composites
- Vol. 30
Sisal fiber reinforced polyethylene terephthalate composites; Fabrication, characterization and possible application
The use of thermoplastics (TPs) for natural fiber composites is restricted to commodity ones like polypropylene and polyethylene However, using engineered TPs such as polyethylene terephthalate (PET) will benefit from its technical and economic advantages. The research aims to characterize injection molded PET composites reinforced with sisal fibers treated differently. Polyethylene terephthalate composites containing 40 wt.% of untreated, alkaline-treated, and alkali/acetylation treated sisal fibers were prepared using compounding and injection molding processes and then characterized. It has been found that production of sisal-PET composites by compounding and injection molding has been shown to be possible. Thermal damage to sisal fiber was noticed during composite production. Based on the thermogravimetric analysis analysis, a net weight loss (excluding water loss) of 11.1%–14.0% was observed at the operating temperatures of the two processes. The addition of 40 wt.% of sisal to the PET matrix improved the tensile modulus by 137%. Further improvement by 179% was observed when alkali-treated sisal fiber was used. The combined alkali/acetylation treatment of sisal yields more enhancement by 233%. This is a significant advancement because modulus is the most influential parameter during the design and service of an engineering product. Generally, compared to the raw sisal composite (RSC) the interfacial, mechanical, thermal, and water absorption properties of the alkali treated sisal composite (Al-SC) and alkali/acetylated sisal composite (Al-ASC) specimens recorded an improvement. Relative to the natural fiber reinforced thermoplastic composites that were commercialized in the automotive industry, the produced sisal–PET composites resulted in a considerable improvement of 66.6%–190% in flexural strength and by 110.5%–410.0% in flexural modulus, depending on sisal fiber treatment and the composite to be compared. Thus, the studied composites can be recommended for various parts of automobiles.
- 1 January 2022
- Published by SAGE Publications in Polymers and Polymer Composites
- Vol. 30
Open AccessSisal fiber reinforced polyethylene terephthalate composites; Fabrication, characterization and possible application
The use of thermoplastics (TPs) for natural fiber composites is restricted to commodity ones like polypropylene and polyethylene However, using engineered TPs such as polyethylene terephthalate (PET) will benefit from its technical and economic advantages. The research aims to characterize injection molded PET composites reinforced with sisal fibers treated differently. Polyethylene terephthalate composites containing 40 wt.% of untreated, alkaline-treated, and alkali/acetylation treated sisal fibers were prepared using compounding and injection molding processes and then characterized. It has been found that production of sisal-PET composites by compounding and injection molding has been shown to be possible. Thermal damage to sisal fiber was noticed during composite production. Based on the thermogravimetric analysis analysis, a net weight loss (excluding water loss) of 11.1%–14.0% was observed at the operating temperatures of the two processes. The addition of 40 wt.% of sisal to the PET matrix improved the tensile modulus by 137%. Further improvement by 179% was observed when alkali-treated sisal fiber was used. The combined alkali/acetylation treatment of sisal yields more enhancement by 233%. This is a significant advancement because modulus is the most influential parameter during the design and service of an engineering product. Generally, compared to the raw sisal composite (RSC) the interfacial, mechanical, thermal, and water absorption properties of the alkali treated sisal composite (Al-SC) and alkali/acetylated sisal composite (Al-ASC) specimens recorded an improvement. Relative to the natural fiber reinforced thermoplastic composites that were commercialized in the automotive industry, the produced sisal–PET composites resulted in a considerable improvement of 66.6%–190% in flexural strength and by 110.5%–410.0% in flexural modulus, depending on sisal fiber treatment and the composite to be compared. Thus, the studied composites can be recommended for various parts of automobiles.