Sheet metal forming using environmentally benign lubricant
Open Access
- 30 April 2020
- journal article
- research article
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 20 (2) , 1-12
Abstract
Sheet metal forming belongs to one of the most important technologies enabling the production durable but quite lightweight metal parts. The quality of the drawn parts depends on the deformed sheet metal, applied forming technology and process parameters, such as contact pressure, relative velocity, temperature or lubrication. The forming of steel (1.4021) parts using benign lubricant is analysed. The paper proposes replacing conventional mineral/synthetic lubricants with ones based on vegetable oils and boric acid. The effectiveness of the lubricants was assessed in laboratory strip drawing and cupping tests, and in production. An oil-based lubricant with an additive of boric acid is very effective in reducing frictional resistance and protecting the forming tools against galling. GraphicKeywords
Funding Information
- Structural Funds in the Operational Programme - Innovative Economy (IE OP) financed from the European Regional Development Fund (POIG.01.01.02-00-015/08-00, POIG.01.01.02-00-015/08-00)
This publication has 37 references indexed in Scilit:
- Recent development trends in metal formingArchives of Civil and Mechanical Engineering, 2019
- Friction and wear performance of olive oil containing nanoparticles in boundary and mixed lubrication regimesWear, 2019
- Study on the anti-wear properties of metal-forming lubricants with TiO2 and CuO nanoparticle additivesIOP Conference Series: Materials Science and Engineering, 2018
- Investigation of tribological properties of CuO/palm oil nanolubricant using pin-on-disc tribotesterGreen Materials, 2018
- An investigation on the lubrication mechanism of MoS2 nano sheet in point contact: The manner of particle entering the contact areaTribology International, 2017
- Assessing the lubrication performance of vegetable oil-based nano-lubricants for environmentally conscious metal forming processesJournal of Cleaner Production, 2016
- A review of recent developments of friction modifiers for liquid lubricants (2007–present)Current Opinion in Solid State and Materials Science, 2014
- Modification of sheet metal forming fluids with dispersed nanoparticles for improved lubricationWear, 2009
- Increasing formability in sheet metal stamping operations using environmentally friendly lubricantsJournal of Materials Processing Technology, 2006
- Tribology in Cold Metal FormingJournal of Manufacturing Science and Engineering, 1997