A Robust Adaptive Trajectory Tracking Algorithm Using SMC and Machine Learning for FFSGRs with Actuator Dead Zones
Open Access
- 12 September 2019
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 9 (18) , 3837
Abstract
The actuator dead zone of free-form surface grinding robots (FFSGRs) is very common in the grinding process and has a great impact on the grinding quality of a workpiece. In this paper, an improved trajectory tracking algorithm for an FFSGR with an asymmetric actuator dead zone was proposed with consideration of friction forces, model uncertainties, and external disturbances. The presented control algorithm was based on the machine learning and sliding mode control (SMC) methods. The control compensator used neural networks to estimate the actuator’s dead zone and eliminate its effects. The robust SMC compensator acted as an auxiliary controller to guarantee the system’s stability and robustness under circumstances with model uncertainties, approximation errors, and friction forces. The stability of the closed-loop system and the asymptotic convergence of tracking errors were evaluated using Lyapunov theory. The simulation results showed that the dead zone’s non-linearity can be estimated correctly, and satisfactory trajectory tracking performance can be obtained in this way, since the influences of the actuator’s dead zone were eliminated. The convergence time of the system was reduced from 1.1 to 0.8 s, and the maximum steady-state error was reduced from 0.06 to 0.015 rad. In the grinding experiment, the joint steady-state error decreased by 21%, which proves the feasibility and effectiveness of the proposed control method.Keywords
Funding Information
- National Key R&D Program of China (2018YFB1308200)
- National Natural Science Foundation of China (61733004, 61573134)
This publication has 40 references indexed in Scilit:
- Research and application of piping inside grinding robots in nuclear power plantEnergy Procedia, 2017
- 3-D Shape Matching of a Blade Surface in Robotic Grinding ApplicationsIEEE/ASME Transactions on Mechatronics, 2016
- Stability analysis of feedback systems with dead-zone nonlinearities by circle and Popov criteriaAutomatica, 2016
- Hand–Eye Calibration in Visually-Guided Robot GrindingIEEE Transactions on Cybernetics, 2015
- Programming a Robot for Conformance Grinding of Complex Shapes by Capturing the Tacit Knowledge of a Skilled OperatorIEEE Transactions on Automation Science and Engineering, 2015
- Adaptive decentralized NN control of large-scale stochastic nonlinear time-delay systems with unknown dead-zone inputsNeurocomputing, 2015
- Exact tracking control of nonlinear systems with time delays and dead-zone inputAutomatica, 2015
- Multiobjective Optimization of an Observer-Based Controller: Theory and Experiments on an Underwater Grinding RobotIEEE Transactions on Control Systems Technology, 2014
- Robust-tracking control for robot manipulator with deadzone and friction using backstepping and RFNN controllerIET Control Theory & Applications, 2011
- Robust adaptive deadzone compensation of DC servo systemIEE Proceedings - Control Theory and Applications, 2006