Seismic Behavior of Beam-Connected Precast Walls with Innovative Concealed Steel Bracings: Experimental Insights and Numerical Study
Open Access
- 17 December 2025
- Vol. 15 (24) , 4559
Abstract
In order to improve the seismic performance of traditional precast lightweight walls, a new precast concrete wall with beam connection and embedded steel support is proposed in this study. Six 2/3-scale specimens were designed for a quasi-static cyclic loading test, and a numerical study was carried out. Key variables include shear span ratio (0.8–1.6), wall thickness (120–200 mm), concrete strength (C25–C40), and concealed column configuration. The experimental results reveal three distinct failure modes, specifically, brace buckling, weld fracture at the lower joints, and bolt shear failure. The system shows excellent ductility (displacement ductility coefficient μ = 3.2–4.1) and energy dissipation capacity (equivalent viscous damping ratio ξ = 0.28–0.35), and its performance is 30–40% higher than that of traditional reinforced concrete walls and close to that of steel plate shear walls. The shear span ratio is reduced by 50%, the shear bearing capacity is increased by 16%, but the peak displacement is halved, and the peak load of concealed column is increased by 57%. The finite element analysis verified the experimental trends and emphasized that the shear capacity can be increased by 12–18% by widening the steel brace (relative to thickening) under the condition of constant steel volume. The results demonstrate that BIM-driven design is very important for solving connection conflicts and ensuring constructability. Parameter research shows that when the concrete strength is greater than C30, the yield load increases by 15–20%, but the influence on the ultimate bearing capacity is minimal. These findings provide an operational guide for the implementation of high-performance prefabricated walls in earthquake-resistant steel structures, and balance the details of constructability through support, connection, and BIM.Keywords
Funding Information
- The Science and Technology Plan of Guangzhou Municipal Construction Group (([2023]-KJ028))
- Key Project of Dongguan Social Development Science and Technology Project ((20231800936112))
This publication has 21 references indexed in Scilit:
- New enhanced hybrid glulam-framed OSB wall for tall timber buildingsStructures, 2024
- An experimental and numerical study on the shear performance of friction-type high-strength bolted connections used for CLT-steel hybrid shear wallsEngineering Structures, 2024
- Evaluation of the seismic performance of novel bundled connections precast shear walls under cyclic loadingStructural Concrete, 2024
- Numerical assessment of In-plane behavior of multi-panel CLT shear walls for modular structuresEngineering Structures, 2023
- Soft omega joint for selective weakening of core walls in large precast commercial buildingsStructures, 2023
- Seismic behavior of precast concrete coupled shear walls with yielding-based and friction-based coupling beamsArchives of Civil and Mechanical Engineering, 2023
- Seismic resilient steel structures: A review of research, practice, challenges and opportunitiesJournal of Constructional Steel Research, 2022
- Bending degradation of thin-walled box beams made of aluminum omega profile and GFRP panel connected by mechanical fastenersComposite Structures, 2022
- Experimental study on L-shaped precast concrete superposed shear walls under quasi-static cyclic loading with different axial compressive load ratiosEngineering Structures, 2022
- Parameter optimal investigation of modular prefabricated two-side connected buckling-restrained steel plate shear wallStructures, 2021