Novel Low-Crystallinity Polyetheretherketone Copolymers for 3D Printing
Authors:
- Azamat ZhansitovAZAzamat Zhansitov
- Zhanna KurdanovaZKZhanna Kurdanova
- Kamila ShakhmurzovaKSKamila Shakhmurzova
- Azamat SlonovASAzamat Slonov
- Azamat KhashirovAKAzamat Khashirov
- Elena RzhevskayaERElena Rzhevskaya
- Khasan MusovKMKhasan Musov
- Alanbek TlupovATAlanbek Tlupov
- Svetlana KhashirovaSKSvetlana Khashirova
Open Access
Abstract
To improve the quality of additive manufacturing of PEEK parts, copolymers with varying 4,4′-dichlorodiphenylsulfone (DCDPS) contents were synthesized. A study of the thermophysical properties of the resulting copolymers revealed that increasing the DCDPS content leads to lower melting temperatures, crystallization temperatures, and degree of crystallinity, while simultaneously increasing the glass transition temperature. It was found that structural amorphization leads to a predictable decrease in the strength and elastic modulus of both cast and printed samples. However, at a DCDPS concentration of 15%, the decrease in mechanical properties is offset by an increase in polymer chain rigidity. The practical result of this study was the successful adaptation of the material to FDM printing: copolymers with DCDPS contents in the range of 5–20% ensured stable molding without deformation or delamination, demonstrating an optimal balance between processability and performance.Keywords
Funding Information
- Russian Science Foundation (25-23-20234)
This publication has 21 references indexed in Scilit:
- A comprehensive investigation of the 3D printing parameters’ effects on the mechanical response of polycarbonate in fused filament fabricationProgress in Additive Manufacturing, 2022
- A review on 3D printed matrix polymer composites: its potential and future challengesThe International Journal of Advanced Manufacturing Technology, 2019
- Polyether ether ketone (PEEK) and its 3D printed implants applications in medical field: An overviewClinical Epidemiology and Global Health, 2019
- Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK materialJournal of Materials Processing Technology, 2017
- Polymers for 3D Printing and Customized Additive ManufacturingChemical Reviews, 2017
- Preliminary study of PLA wire colour effects on geometric characteristics of parts manufactured by FDMProcedia Manufacturing, 2017
- Polyetheretherketone (PEEK) for medical applicationsJournal of Materials Science: Materials in Medicine, 2016
- Oscillatory and steady shear viscosity: The Cox–Merz rule, superposition, and application to EHL frictionTribology International, 2014
- Soluble, semi-crystalline PEEK analogs based on 3,5-difluorobenzophenone: Synthesis and characterizationPolymer, 2012
- Properties of high modulus PEEK yarns for aerospace applicationsJournal of Applied Polymer Science, 2009