Research on Quasi-Static Transmission Error Measurement of Spur Gears Based on the Acceleration Method
Open Access
Abstract
Transmission error (TE) is an important parameter in gear dynamics that has a direct impact on the vibration and noise of gears. Under quasi-static conditions, gear elastic deformation and assembly errors amplify with increasing load, potentially contributing to noise and vibration. This paper presents a novel method for measuring the quasi-static transmission error (QSTE) of spur gears under quasi-static conditions. In particular, the study investigates the relationship between quasi-static transmission error, elastic deformation transmission error, and gear tangential acceleration. Gear elastic deformation transmission error was calculated from experimental data obtained with single-point, symmetrical dual-point, and orthogonal four-point configurations of tangential acceleration sensors. The orthogonal four-point sensor configuration greatly improves measurement accuracy when compared to theoretical values derived from material mechanics calculations. A dedicated on-machine acquisition system for spur gear tangential acceleration was constructed. Tangential acceleration tests were conducted across varying loads and rotational speeds. The acquired data underwent filtering and integration processing in order to obtain gear elastic deformation and quasi-static transmission error. The feasibility of the acceleration approach for measuring both gear elastic deformation and quasi-static transmission error is confirmed by a comparative analysis of the acceleration method results with transmission errors obtained via material mechanics calculations and magnetic grating detection.Keywords
Funding Information
- 2020 National Key Research and Development Program of China (2020YFB2008100)
- National Natural Science Foundation of China (52105061)
- Natural Science Foundation of Jiangsu Province (BK20200424, BK20200430)
- Nanjing University of Aeronautics and Astronautics
- Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology
- Sichuan Gas Turbine Establishment
- Aero Engine Corporation of China
This publication has 22 references indexed in Scilit:
- Development and application of high strength gearsThe International Journal of Advanced Manufacturing Technology, 2024
- Quasi-Static Transmission Error Measurement Using Micro-DeformationIranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2023
- Numerical and experimental analysis of the transmission error in hybrid metal-composite gearsComposite Structures, 2022
- Absolute transmission error: A simple new tool for assessing gear wearMechanical Systems and Signal Processing, 2021
- A novel method to predict static transmission error for spur gear pair based on accuracy gradeJournal of Central South University, 2020
- Experiments on the relationship between the dynamic transmission error and the dynamic stress factor of spur gear pairsMechanism and Machine Theory, 2013
- An Alternative Formulation of the Dynamic Transmission Error to Study the Oscillations of Automotive Hypoid GearsJournal of Vibration and Acoustics, 2013
- Measurement of vibratory motions of gears supported by compliant shaftsMechanical Systems and Signal Processing, 2012
- Effect of Convex Tooth Flank Form Deviation on the Characteristics of Transmission Error of Gears Considering Elastic DeformationJournal of Mechanical Design, 2010
- A method of measuring transmission error in spur gears of 1:1 ratioJournal of Scientific Instruments, 1963