Abstract
The Cu-1.8Ni-0.9Co-xSi alloys with different Si content (Si/(Co+Ni) =1/6, 2/6, 3/6 and 4/6, atomic ratio) were prepared by vacuum melting, and their microstructural evolutions were systematically investigated, as well as the physical property. The increase of Si content had a significant refinement effect on alloy structures, and this effect could be maintained throughout the entire process, namely solid-solution, hot-rolling, annealing, cold-rolling and aging. Two different morphologies of (Ni,Co)2Si phases were present in the as-cast structure: one was the granular-shaped segregation phase at grain boundary, and the other was the disc-shaped precipitated phase inside grain. They completely dissolved into the matrix during solution, and then re-precipitated into the nano-scale (Ni,Co)2Si phases during aging, which would effectively hinder the dislocation movement through the bypassing mechanism. The Si content increasing would promote this beneficial precipitation behavior, but severely damage the electrical conductivity once excess. The optimal property was obtained for alloy, owing an appropriate Si content of 0.427-0.641 wt.%, and aged at 723 K for 40-240 min (electrical conductivity >43 %IACS, hardness >253.0 HV, UTS >784.2 MPa). The precipitation kinetics equation was also obtained, and it kept in good agreements with the experimental values, for an error of less than 1%.