Dissipation of Energy and Generation of Pore Pressure in Load-Controlled and Displacement-Controlled Cyclic Tests
Open Access
- 9 October 2024
- journal article
- research article
- Published by MDPI AG in Geotechnics
- Vol. 4 (4) , 1026-1047
Abstract
The amount of energy dissipated in the soil during cyclic loading controls the amount of pore pressure generated under that loading. Because of this, the normalized dissipated energy per unit volume is the basis for both pore pressure generation models and energy-based liquefaction analyses. The pattern of energy dissipation in the soil in load-controlled cyclic triaxial and load-controlled cyclic direct simple shear tests and displacement-controlled cyclic triaxial and displacement-controlled cyclic direct simple shear tests is quite different. As a result, the pattern of pore pressure generation associated with load-controlled tests is markedly different from that in displacement-controlled tests. Pore pressure generation patterns for each of the four test types were proposed based upon the manner in which the load was applied during the test and the soil’s response to that loading. The results of four tests, two load controlled and two displacement controlled, were then used to verify these patterns. Pore pressure generation rates in load-controlled and displacement-controlled tests are different when plotted against their cycle ratios. Conversely, the tests produce nearly identical patterns when plotted against energy dissipation ratio. This occurs because of the relationship between energy dissipation ratio and pore pressure generation is independent of the loading pattern.Keywords
This publication has 44 references indexed in Scilit:
- Liquefaction proneness of stratified sand-silt layers based on cyclic triaxial testsJournal of Rock Mechanics and Geotechnical Engineering, 2022
- Liquefaction behavior of fiber-reinforced calcareous sands in unidirectional and multidirectional simple shear testsGeotextiles and Geomembranes, 2022
- Comparison of sand liquefaction in cyclic triaxial and simple shear testsSoils and Foundations, 2021
- Deformation and cyclic resistance of sand in large-strain undrained torsional shear tests with initial static shear stressSoils and Foundations, 2021
- Effect of vertical effective and initial static shear stresses on the liquefaction resistance of sands in cyclic direct simple shear testsSoils and Foundations, 2020
- Liquefaction resistance from cyclic simple and triaxial shearing: a comparative studyActa Geotechnica, 2020
- Influence of Fines Contents on Soil Liquefaction Resistance in Cyclic Triaxial TestGeotechnical and Geological Engineering, 2020
- Monotonic and cyclic simple shear response of gravel-sand mixturesSoil Dynamics and Earthquake Engineering, 2018
- Centrifuge model testing on reliquefaction characteristics of sandBulletin of Earthquake Engineering, 2018
- Liquefaction Resistance of Sandy Soils from Undrained Cyclic Triaxial TestsGeotechnical and Geological Engineering, 2018