Abstract
The stress corrosion cracking (SCC) behavior of a Zr–Sn–Nb alloy in simulated PWR primary water was systematically investigated as a function of dissolved oxygen (DO, ~10–500 ppb), dissolved hydrogen (DH, 0–50 cc STP H2/kg H2O), and pre-hydrogenation (~640 ppm H). Crack growth rates, crack-tip oxide thickness, hydride fraction, and local plasticity were characterized by DCPD, TEM, and TKD. The SCC propagation rate is largely insensitive to DO, whereas DH exerts a clear retarding effect, reducing the rate by a factor of 2 to 5. Pre-hydrogenation slightly accelerates cracking, an effect attributed not to altered oxidation kinetics, since oxide thickness and hydride fraction remain essentially unchanged, but to enhanced oxide film rupture promoted by solute hydrogen via the HELP mechanism. This hydrogen-induced effect primarily lowers the threshold stress intensity factor for crack propagation, while its influence on the subsequent growth rate is marginal. Crack-tip oxidation is governed predominantly by the direct Zr–H2O reaction, with DO/DH-mediated cathodic reactions playing only a subordinate role. These findings reveal that oxidation kinetics and hydrogen uptake are decoupled in governing SCC propagation: oxidation kinetics control the rate of film regrowth, whereas hydrogen uptake modulates the plasticity-dependent film rupture process through the competing effects of solute hydrogen and hydrides. A distinct slip-oxidation mechanism is thus established for zirconium alloys in high-temperature water, fundamentally different from the water-chemistry-controlled behavior of stainless steels. This mechanistic distinction provides a new basis for evaluating SCC susceptibility in zirconium-based fuel cladding under extended service conditions.

This publication has 41 references indexed in Scilit: