Design and experiment study on a novel magnetorheological impact damper coupled with multiple parallel relief orifices for reducing higher impact peaks
- 30 December 2024
- journal article
- research article
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 36 (4) , 242-258
Abstract
Conventional magnetorheological (MR) dampers exhibit the drawbacks of excessively large and non-adjustable peak force/acceleration during the initial impact in the context of high-impact loads, limiting their applicability in the field of impact resistance. This paper introduces an innovative MR damper (MRD), which, coupled with multiple parallel relief orifices, is capable of effectively mitigating the initial impact peak and enhancing the plateau effect during the mid and late stages of impact. Firstly, the configuration and principle of the novel MRD with multiple orifices (MRDWO) are illustrated and its nonlinear model, based on Bingham-Plastic model and accounting for minor loss, is established. Secondly, the structural design and fabrication of MRDWO were conducted. Simultaneously, for comparative purposes, a traditional MRD with an identical structure to MRDWO, except for the absence of relief orifices, was also fabricated. Then, experimental investigations were conducted separately on MRDWO and MRD without relief orifices (MRDWOO) under various impact velocities and control currents to study their damping forces, accelerations, and displacement responses. Finally, the experimental results of MRDWO were utilized to validate the reliability of the aforementioned nonlinear model. Additionally, a comparative analysis was conducted between MRDWO and MRDWOO under various operating conditions in terms of impact forces, accelerations, and displacements. The results indicate that the novel MRDWO significantly reduces the impact force/acceleration peak during the initial impact and enhances the plateau effect of force/acceleration in mid to later stages, thereby reducing the required displacement for absorbing. This is crucial for mitigating the initial impact damage and improving the damping efficiency of the MR damper.Keywords
Funding Information
- China Postdoctoral Science Foundation (No. 2022M711621)
- National Natural Science Foundation of China (52075264)
- Natural Science Foundation of Jiangsu Province (BK20230926)
- Postgraduate Research & Practice Innovation Program of Jiangsu Province (KYCX24_0634)
- Postgraduate Research & Practice Innovation Program of Jiangsu Province (SJCX24_0150)
This publication has 35 references indexed in Scilit:
- Hybrid modeling of the nonlinear behaviors for magnetorheological energy absorberInternational Journal of Mechanical Sciences, 2022
- Numerical Study of Rotary Magnetorheological Seat Suspension on the Impact Protection2021
- Hydraulic Control Systems2019
- Explosive-induced shock damage in copper and recompression of the damaged regionJournal of Applied Physics, 2016
- Experimental investigation on the hysteresis behavior of the wire rope isolatorsJournal of Mechanical Science and Technology, 2015
- Nonlinear modeling and experimental characterization of hydraulic dampers: effects of shim stack and orifice parameters on damper performanceNonlinear Dynamics, 2011
- Magnetorheological fluid dampers: a review of parametric modellingSmart Materials and Structures, 2011
- Modelling and design of a novel air-spring for a suspension seatJournal of Sound and Vibration, 2010
- Passenger car collision fatalities – with special emphasis on collisions with heavy vehiclesAccident Analysis & Prevention, 2008
- Impact absorber with two-stage, variable area orifice hydraulic damperJournal of Sound and Vibration, 1977