Thermal Activation and Ductile vs. Brittle Behavior of Microcracks in 3D BCC Iron Crystals under Biaxial Loading by Atomistic Simulations
Open Access
Abstract
We present the results of free 3D molecular dynamics (MD) simulations, focused on the influence of temperature on the ductile-brittle behavior of a pre-existing central Griffith through microcrack (crack plane/crack front) under biaxial loading σA and σB in tension mode I. At temperatures of 300 K and 600 K, the MD results provide new information on the threshold values of the stress intensity factor K and the energy release rate G, needed for the emission of {112} blunting dislocations that support crack stability. A simple procedure for the evaluation of thermal activation from MD results is proposed in the paper. 3D atomistic results are compared with continuum predictions on thermal activation of the crack induced dislocation generation. At elevated temperature T and biaxiality ratios σB/σA ≤ 0.8 dislocation emission in MD is observed, supported by thermal activation energy of about ~30 kBT. With increasing temperature, the ductile-brittle transition moves to a higher biaxiality ratios in comparison with the situation at temperature of ~0 K. Near the transition, dislocation emission occurs at lower loadings than expected by continuum predictions. For the ratios σB/σA ≥ 1, the elevated temperature facilitates (surprisingly) the microcrack growth below Griffith level.
Keywords
Funding Information
- Grantová Agentura České Republiky (GACR 17-12925S)
- European Regional Development Fund (CZ.02.1.01/0.0/0.0/15_003/0000493)
- Technology Agency of the Czech Republic (TK01030108)
- Institute Research Program (RVO: 61388998)
This publication has 32 references indexed in Scilit:
- Crack-induced stress, dislocations and acoustic emission by 3-D atomistic simulations in bcc ironActa Materialia, 2009
- The brittle–ductile transition in single-crystal ironActa Materialia, 2008
- Influence of crack orientation on the ductile–brittle behavior in Fe–3 wt.% Si single crystalsMaterials Characterization, 2007
- Residual stress in Fe–Cu alloys at 0 and 600 KComputational Materials Science, 2002
- Deformation twins — probable inherent nuclei of cleavage fracture in ferritic steelsMaterials Science and Engineering: A, 2002
- Three-dimensional fracture via large-scale molecular dynamicsEngineering Fracture Mechanics, 1998
- Computer simulation of point defect properties in dilute Fe—Cu alloy using a many-body interatomic potentialPhilosophical Magazine A, 1997
- Molecular statics simulation of fracture in -ironModelling and Simulation in Materials Science and Engineering, 1996
- COMPENDIUM OF T‐STRESS SOLUTIONS FOR TWO AND THREE DIMENSIONAL CRACKED GEOMETRIESFatigue & Fracture of Engineering Materials & Structures, 1995
- On the dominant mechanism of irradiation embrittlement of reactor pressure vessel steelsScripta Metallurgica, 1983