A 2 GHz 244 fs-Resolution 1.2 ps-Peak-INL Edge Interpolator-Based Digital-to-Time Converter in 28 nm CMOS
- 24 August 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 51 (12) , 2992-3004
Abstract
This paper presents a 2 GHz digital-to-time converter (DTC) with 244 fs time resolution. The DTC consists of a multi-modulus divider (MMD) and a phase interpolator (PI) as coarse and fine tuning blocks, respectively. Control logic is implemented to prevent shoot-through current during the interpolation process in order to linearize the PI. The measured DTC's peak integral nonlinearity (INL) is 1.2 ps and limited by the PI. The interpolation process is analyzed in detail, describing the root cause of the nonlinearity and indicating key parameters to improve it. Furthermore, a measurement method for DTCs is presented that enables femtosecond accuracy. The DTC has been implemented in standard 28 nm CMOS technology.Keywords
This publication has 26 references indexed in Scilit:
- 9.7 a self-calibrated 10mb/s phase modulator with -37.4db evm based on a 10.1-to-12.4ghz, -246.6db-fom, fractional-n subsampling pll2016
- A Sensitive Method to Measure the Integral Nonlinearity of a Digital-to-Time Converter Based on Phase ModulationIEEE Transactions on Circuits and Systems II: Express Briefs, 2015
- A 9.2–12.7 GHz Wideband Fractional-N Subsampling PLL in 28 nm CMOS With 280 fs RMS JitterIEEE Journal of Solid-State Circuits, 2015
- A 10-bit, 550-fs step Digital-to-Time Converter in 28nm CMOS2014
- A 2.4-GHz 20–40-MHz Channel WLAN Digital Outphasing Transmitter Utilizing a Delay-Based Wideband Phase Modulator in 32-nm CMOSIEEE Journal of Solid-State Circuits, 2012
- A 2.9–4.0-GHz Fractional-N Digital PLL With Bang-Bang Phase Detector and 560-${\rm fs}_{\rm rms}$ Integrated Jitter at 4.5-mW PowerIEEE Journal of Solid-State Circuits, 2011
- A 5.3GHz digital-to-time-converter-based fractional-N all-digital PLL2011
- A 12-bit digital-to-time converter (DTC) for time-to-digital converter (TDC) and other time domain signal processing applications2010
- A fully digital polar transmitter using a digital-to-time converter for high data rate system2009
- A high-resolution DLL-based digital-to-time converter for DDS applications2003