A new method to manufacture parylene microcapillaries
Authors:
- 1 January 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1245-1248
Abstract
A new way to fabricate extremely long and uniform Parylene microcapillaries with a minimum inner diameter of 3 μm and a length exceeding 30 cm is reported here. The method starts with drawing sacrificial poly(ethylene carbonate) (PEC) fibers from its chloroform solution and then forms hollow capillaries by coating the fibers with Parylene and removing the sacrificial PEC at its thermolytic temperature. For the fiber drawing, the relation of fiber diameter to other parameters including drawing speed, fiber aspect ratio, solution viscosity and solvent evaporation rate are studied at 0 and 25 °C. It is found that 0 °C is near the optimal temperature in terms of fiber diameter uniformity. Finally, this work also reports a self-expelling mechanism of the molten PEC at its thermolytic temperature from inside the Parylene-coated PEC fibers, which greatly reduces the sacrificial time to only tens of minutes.Keywords
This publication has 7 references indexed in Scilit:
- Thermal decomposition of poly(propylene carbonate): End-capping, additives, and solvent effectsPolymer Degradation and Stability, 2016
- Characterization and modeling of direct-write fabrication of microscale polymer fibersPolymer, 2011
- Drawing suspended polymer micro-/nanofibers using glass micropipettesApplied Physics Letters, 2006
- Characterization of micromanipulator-controlled dry spinning of micro- and sub-microscale polymer fibersJournal of Micromechanics and Microengineering, 2006
- Direct Drawing of Suspended Filamentary Micro- and Nanostructures from Liquid PolymersNano Letters, 2004
- A review on polymer nanofibers by electrospinning and their applications in nanocompositesComposites Science and Technology, 2003
- Using filament stretching rheometry to predict strand formation and "processability" in adhesives and other non-Newtonian fluidsRheologica Acta, 2000