Effect of Rotor Topology on the Performance of Counter-Rotating Double-Sided Flux Switching Permanent Magnet Generator
- 10 August 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 37 (1) , 65-74
Abstract
Recently, electric power generation from direct-drive counter-rotating wind turbine has gained considerable attention. Consequently, employing an efficient and a high power density electric generator is important. In this regard, flux switching permanent magnet generator with double-sided structure is one of the potential candidates for this purpose due to its features like inherently magnetic gearing effect, high power density, high reliability, and robust rotor structure. In this regard, rotor structure of double-sided flux switching permanent magnet generator is one of the most important factors which can highly affect the machine's performance due to the fact that, rotor geometry is the main part in the flux switching procedure of double-sided flux switching permanent magnet generator. Consequently, this paper presents a comprehensive analysis of counter-rotating double-sided flux switching permanent magnet generator with segmented rotor and laminated rotor in which a bridge is located between adjacent rotor poles. The finite element simulations and experimental tests results showed that the proposed generator with laminated rotor gained from the higher power density in comparison with the segmented one whereas in the case of segmented rotor, the torque ripple is lower.Keywords
This publication has 25 references indexed in Scilit:
- A Segmented Brushless Doubly Fed Generator for Wind Power ApplicationsIEEE Transactions on Magnetics, 2017
- Analysis of Air-Gap Field Modulation and Magnetic Gearing Effect in Fractional-Slot Concentrated-Winding Permanent-Magnet Synchronous MachinesIEEE Transactions on Industrial Electronics, 2017
- Design of a PM-generator for a straight flow counter-rotating micro-hydro turbine2017
- Finite element analysis of a wind generator with two counter-rotating rotors2017
- Design Evaluation of Conventional and Toothless Stator Wind Power Axial-Flux PM GeneratorIEEE Transactions on Magnetics, 2017
- Analysis of Air-Gap Field Modulation and Magnetic Gearing Effects in Switched Flux Permanent Magnet MachinesIEEE Transactions on Magnetics, 2015
- Design and Analysis of a Magnetless Double-Rotor Flux Switching Motor for Low Cost ApplicationIEEE Transactions on Magnetics, 2014
- A Wound Field Switched Flux Machine With Field and Armature Windings Separately Wound in Double StatorsIEEE Transactions on Energy Conversion, 2014
- An Experimental Investigation on the Aeromechanics and Near Wake Characteristics of Dual-Rotor Wind Turbines (DRWTs)2014
- Aspects regarding the application of electric generators to wind energy conversion using counter rotating turbines2013