Numerical Investigation of Performance and Flow Characteristics of a Tunnel Ventilation Axial Fan with Thickness Profile Treatments of NACA Airfoil
Open Access
Abstract
An axial flow fan, which is applied for ventilation in underground spaces such as tunnels, features a medium–large size, and most of the blades go through the casting process in consideration of mass production and cost. In the casting process, post-work related to roughness treatment is essential, and this is a final operation to determine the thickness profile of an airfoil which is designed from the empirical equation. In this study, the effect of the thickness profile of an airfoil on the performance and aerodynamic characteristics of the axial fan was examined through numerical analysis with the commercial code, ANSYS CFX. In order to conduct the sensitivity analysis on the effect of the maximum thickness position for each span on the performance at the design flow rate, the design of experiments (DOE) method was applied with a full factorial design as an additional attempt. The energy loss near the shroud span was confirmed with a quantified value for the tip leakage flow (TLF) rate through the tip clearance, and the trajectory of the TLF was observed on the two-dimensional (2D) coordinates system. The trajectory of the TLF matched well with the tendency of the calculated angle and correlated with the intensity of the turbulence kinetic energy (TKE) distribution. However, a correlation between the TLF rate and TKE could not be established. Meanwhile, the Q-criterion method was applied to specifically initiate the distribution of flow separation and inlet recirculation. The location accompanying the energy loss was mutually confirmed with the axial coordinates. Additionally, the nonuniform blade loading distribution, which was more severe as the maximum thickness position moved toward the leading edge (LE), could be improved significantly as the thickness near the trailing edge (TE) became thinner. The validation for the numerical analysis results was performed through a model-sized experimental test.Keywords
Funding Information
- Korea Institute of Energy Technology Evaluation and Planning (20172010106010)
This publication has 34 references indexed in Scilit:
- Vortex Features in a Half-ducted Axial Fan with Large Bellmouth (Effect of Tip Clearance)International Journal of Fluid Machinery and Systems, 2011
- Experimental study of blade thickness effects on the overall and local performances of a Controlled Vortex Designed axial-flow fanExperimental Thermal and Fluid Science, 2011
- Computational study of convective–diffusive mixing in a microchannel mixerChemical Engineering Science, 2011
- Effects of Silencer Design on the Performance of Jet-fanJournal of Fluid Machinery, 2010
- Performance Improvement of High Speed Jet FanInternational Journal of Fluid Machinery and Systems, 2010
- Development of an axial-type fan with an optimization methodFrontiers of Energy and Power Engineering in China, 2009
- Effects of Flow Settling Means on the Performance of Fan TesterJournal of Fluid Machinery, 2005
- Tip clearance noise of axial flow fans operating at design and off-design conditionJournal of Sound and Vibration, 2004
- Comparison of Turbulence Kinetic Energy Dissipation Rate Estimates from Two Ocean Microstructure ProfilersJournal of Atmospheric and Oceanic Technology, 1995
- Noise generated by low pressure axial flow fans, III: Effects of rotational frequency, blade thickness and outer blade profileJournal of Sound and Vibration, 1978