Numerical and experimental investigation of mixed‐mode crack growth in aluminum alloys
Open Access
- 10 July 2022
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 45 (10) , 2854-2872
Abstract
Fatigue crack growth in Al 2024 and Al 7050 specimens was assessed experimentally and numerically. In the experimental investigation, various specimen configurations and loading conditions were used to achieve pure mode I, pure mode II, and mixed mode I/II, I/III, and I/II/III. Sample configurations were as follows: first, compact tension shear (CTS) specimen to reproduce pure mode‐I and pure initial mode‐II loading conditions; second, surface crack tension (SCT) specimen to analyze the behavior of semielliptical surface cracks in mode‐I and mixed‐mode conditions; and third, hollow cylindrical (HC) specimen with initial semielliptical surface crack to analyze fatigue crack growth under complex stress state. In the numerical study, finite element method (FEM) simulations were performed by means of FRANC3D and ABAQUS solver. The numerical predictions were validated with the experimental results. These predictions resulted to be accurate estimation of the crack growth across the broad range of the investigated loading conditions.Keywords
This publication has 44 references indexed in Scilit:
- An inclined surface crack subject to biaxial loadingInternational Journal of Solids and Structures, 2011
- Stress intensity factor equations for mixed-mode surface and corner cracks in finite-thickness plates subjected to tension loadsInternational Journal of Pressure Vessels and Piping, 2011
- Fatigue crack paths for inclined cracks and surface flaws under biaxial loadingEngineering Fracture Mechanics, 2010
- Non-linear MSD crack growth by DBEM for a riveted aeronautic reinforcementAdvances in Engineering Software, 2009
- Stress intensity factors in a hollow cylinder containing a circumferential semi-elliptical crack subjected to combined loadingInternational Journal of Fatigue, 2007
- The effect of steady torsion on fatigue crack growth in shaftsInternational Journal of Fatigue, 2006
- Fatigue crack growth for straight-fronted edge crack in a round barInternational Journal of Fatigue, 2006
- Theoretical crack path predictionFatigue & Fracture of Engineering Materials & Structures, 2004
- General behaviour of collapsed 8‐node 2‐D and 20‐node 3‐D isoparametric elementsInternational Journal for Numerical Methods in Engineering, 1993
- On the use of isoparametric finite elements in linear fracture mechanicsInternational Journal for Numerical Methods in Engineering, 1976