Cohesive zone parametric analysis in the tensile impact strength of tubular adhesive joints
- 21 March 2022
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 237 (1) , 26-37
Abstract
The use of tubular adhesive joints has considerably grown, including applications in truss/vehicles frames and fluid transportation pipelines, but the impact performance of these joints is under addressed in the literature. It thus becomes pertinent to propose modelling techniques to predict and characterize tubular joints to withstand these loads, which involve a higher modelling complexity than the static loading case. This work evaluates, by cohesive zone modelling (CZM), the tensile impact strength of tubular joints between AW6082-T651 aluminium alloy adherends and bonded with different adhesives. Initially, CZM validation was accomplished with single-lap joint (SLJ) data. For the tubular joints, the influence of geometric parameters was evaluated by changing the overlap length ( LO) and outer tube thickness ( tSE). The analysis begins with an elastic stress analysis to the adhesive layer, followed by maximum load ( Pm) and dissipated energy at failure ( U) predictions using CZM, impact velocity effect and comparison with static analytical solutions. With this study, it was possible to evaluate the different geometrical parameters, select the optimal geometry and adhesive type, and to validate the CZM technique for the impact strength prediction of tubular adhesive joints.Keywords
This publication has 35 references indexed in Scilit:
- Strength prediction of single- and double-lap joints by standard and extended finite element modellingInternational Journal of Adhesion and Adhesives, 2011
- Study on the Effect of Strain Rate of Adhesive Material on the Stress State in Adhesive JointsThe Journal of Adhesion, 2011
- Single-Lap Joints of Similar and Dissimilar Adherends Bonded with an Acrylic AdhesiveThe Journal of Adhesion, 2009
- A finite element simulation and experimental validation of a composite bolted joint loaded in bending and torsionComposites Part A: Applied Science and Manufacturing, 2007
- Numerical modelling of lap joints bonded with a rate-dependent adhesiveInternational Journal of Adhesion and Adhesives, 2004
- Tubular Adhesive Joints Under Axial LoadJournal of Applied Mechanics, 2003
- Multiaxial fatigue life evaluation of tubular adhesively bonded jointsInternational Journal of Adhesion and Adhesives, 1997
- Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressuresEngineering Fracture Mechanics, 1985
- Stress Analysis of Adhesive Bonded Tubular Lap JointsThe Journal of Adhesion, 1977
- Yielding of steel sheets containing slitsJournal of the Mechanics and Physics of Solids, 1960