Early Age Carbonation of Fiber-Cement Composites under Real Processing Conditions: A Parametric Investigation
Open Access
- 26 January 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 8 (2) , 190
Abstract
This paper presents the outcome of a comprehensive experimental program undertaken to study the performance of cellulose pulp and synthetic PVA (polyvinyl alcohol) based fiber-cement composite under both carbonated and non-carbonated curing conditions at early age. The composites were produced at different rolling pressures (2.5 to 9.0 bar) and subjected to various curing conditions in which the effects of CO2 pressure (1 to 3 bar) and curing time (3 to 9 h) were studied. The mechanical properties (modulus of elasticity (MOE), modulus of rupture (MOR), and toughness), as well as the physical properties (porosity, bulk density, and water absorption), were measured for all samples. Scanning electron microscopy (SEM) was used to investigate the effect of carbonation on porosity change and adhesion of fiber-matrix. A parametric investigation of the effects of the carbonation curing period, CO2 pressure, and rolling pressure on the improvement of the physical and mechanical properties during carbonation curing was performed. Results showed that fiber-cement composites cured with an elevated CO2 pressure of 3 bar, rolling pressure of 3 bar, and 5 h of curing time provided optimal curing conditions resulting in the most desirable mechanical and physical properties. However, toughness was greatly reduced with the increase of the CO2 pressure, curing time, and rolling pressure. Additionally, the carbonation curing improved the bonding between the fiber and the cement matrix because of the precipitation of calcite particularly in the pores of the interfacial transition zone (ITZ) between the cement matrix and the fibers.Keywords
This publication has 38 references indexed in Scilit:
- Definition of optimal parameters for supercritical carbonation treatment of vegetable fiber-cement composites at a very early ageConstruction and Building Materials, 2017
- Effect of Limestone Fillers on Ca-Leaching and Carbonation of Cement PastesKey Engineering Materials, 2016
- Effect of limestone fillers on microstructure and permeability due to carbonation of cement pastes under controlled CO 2 pressure conditionsConstruction and Building Materials, 2015
- An overview of current status of carbon dioxide capture and storage technologiesRenewable and Sustainable Energy Reviews, 2014
- Cementitious building materials reinforced with vegetable fibres: A reviewConstruction and Building Materials, 2011
- Asbestos-free technology with new high toughness polypropylene (PP) fibers in air-cured Hatschek processConstruction and Building Materials, 2010
- Carbon Dioxide Capture and StorageMRS Bulletin, 2008
- Characterization of rheology of fresh fiber reinforced cementitious composites through ram extrusionMaterials and Structures, 2005
- A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of CO2Journal of Hazardous Materials, 2004
- Characterization of Interfacial Properties in Fiber‐Reinforced Cementitious CompositesJournal of the American Ceramic Society, 1991