Influence of Processing Parameters on the Mechanical Properties of 3D Printed Borosilicate Particulate Reinforced Polymer Composites
Open Access
- 5 September 2026
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (9) , 478
Abstract
Emerging composite materials are expanding the potential of additive manufacturing and enabling applications previously restricted by traditional manufacturing methods through their multi-phase nature and complex internal geometry. Additionally, these materials can be pyrolyzed to create dense metal, ceramic, and glass parts with geometries typically not achievable by traditional processes. Additive manufacturing of borosilicate glass composites can enable new applications in nuclear engineering, astronomy, and bone regrowth therapy. To elucidate the process–parameter relationship of borosilicate–polylactic acid (PLA) composites, mechanical test specimens were fabricated by fused-filament fabrication and compared with a pure PLA baseline. Optical and scanning electron microscopy were conducted to observe the specimen microstructure before and after testing. From the stress–strain curves, the highest compressive yield strength for the composite was 28.22 MPa, and the highest compressive yield strength for PLA was 49.30 MPa. Print orientation was found to benefit the composite material but have a detrimental effect on the pure matrix material. Borosilicate–PLA with 100% infill, 1 shell wall, and layer lines parallel to compression axis had an elastic modulus of 2.66 GPa. Microscopy revealed that lower-modulus composite specimens had the particulates re-distributed within the matrix. Tensile testing was done according to a polymer testing standard, which caused difficulties obtaining consistent fracture within the gauge length.Keywords
This publication has 25 references indexed in Scilit:
- Particle-Reinforced Polymer Matrix Composites (PMC) Fabricated by 3D PrintingJournal of Inorganic and Organometallic Polymers and Materials, 2023
- Review of recent developments in polymer matrix composites with particulate reinforcements2023
- Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive reviewAdvanced Drug Delivery Reviews, 2016
- Mechanical property parametric appraisal of fused deposition modeling parts based on the gray Taguchi methodThe International Journal of Advanced Manufacturing Technology, 2016
- A review of bioactive glasses: Their structure, properties, fabrication and apatite formationJournal of Biomedical Materials Research Part A, 2013
- Bioactive glass in tissue engineeringActa Biomaterialia, 2011
- Introduction to Biopolymers from Renewable Resources1998
- Towards routine tensile testingInternational Journal of High Technology Ceramics, 1988
- The thermal expansion of alkali borate glasses and the boric oxide anomalyJournal of Non-Crystalline Solids, 1969
- Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle .ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 1929