Mechanical Investigation of Carbon Steel under Strong Corrosion Effected by Corrosion Pits
Authors:
Open Access
- 16 June 2022
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2022, 1-18
Abstract
This study investigated the effect of corrosion pits on the mechanical degradation of steel Q345 under strong acid corrosion. The experiment on a total of 27 steel Q345 specimens corroded by 36 industrial hydrochloric acid for 0h, 1h, 2h, 4h, 8h, 12h, 24h, 48h, and 72h, respectively, is conducted to study failure mode and stress-strain curves. After that, a noncontact topography scanner (DSX500) scanned geometric parameters of corrosion pits in steel Q345 to establish its mechanical degradation. The surface morphology and the corresponding degradation law of corroded steel are also revealed. In addition, the steel plastic fracture criterion taking into account equivalent plastic fracture strain and average stress triaxiality T is adopted to propose the uniform pit model. The analysis results show that the failure mode gradually changes from ductile to brittle. It is noted that the depth and relative size of the corrosion pit are the main factors affecting the increase of the maximum pit coefficient. Further, FEM based on uniform corrosion pits is found by the flexible damage evolution criterion. Its calculation results are entirely consistent with experimental results, indicating that this model can mirror the surface morphology of steel suffering strong corrosion, and simulated accurately stress flow law and necking failure of strong corrosion steel. The proposed criterion is validated with verification results and can provide good references for the design of steel bridges under strong corrosion.Keywords
Funding Information
- National Natural Science Foundation of China (52078043, 2021JM-434, 2021JQ-648, XAGDYJ190101)
- Natural Science Foundation of Shaanxi Province (52078043, 2021JM-434, 2021JQ-648, XAGDYJ190101)
- Graduate Education and Teaching Reform Research Project of Xi’an Technology University (52078043, 2021JM-434, 2021JQ-648, XAGDYJ190101)
This publication has 25 references indexed in Scilit:
- Tensile strength assessment of corroded small scale specimensCorrosion Science, 2014
- Use of a 3D optical measurement technique for stochastic corrosion pattern analysis of reinforcing bars subjected to accelerated corrosionCorrosion Science, 2013
- Numerical investigation on torsional stress concentration factor at the semi elliptical corrosion pitCorrosion Science, 2013
- Ultimate strength of corroded steel plates with irregular surfaces under in-plane compressionOcean Engineering, 2012
- Prediction of residual strength of corroded tensile steel platesInternational Journal of Steel Structures, 2011
- Application of a stress triaxiality dependent fracture criterion in the finite element analysis of unnotched Charpy specimensTheoretical and Applied Fracture Mechanics, 2010
- Development of pitting corrosion of stainless steel 403 in sodium chloride solutionsRussian Journal of Electrochemistry, 2010
- Strength and deformability of corroded steel plates under quasi-static tensile loadJournal of Marine Science and Technology, 2009
- Probability distribution of pitting corrosion depth and rate in underground pipelines: A Monte Carlo studyCorrosion Science, 2009
- Analysis of pits induced stresses due to metal corrosionCorrosion Science, 2008