FYFan Yang

Fan Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Fan Yang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Carbon emission analysis and evaluation of steel-concrete composite structure bridge based on fuzzy comprehensive evaluation comprehensive evaluation method

    by Yiqian Li, Wenjing Qiao, Fan Yang, Tingkun Zhou, Haoxuan Quan

    Measuring the low carbon performance of buildings is a crucial method for achieving the construction industry's strategic goal of “double carbon.” The carbon emission factor calculation approach proposed by the IPCC is utilized to create a carbon emission calculation model for a steel-concrete composite structure bridge across its whole life cycle. The discount rate is used to determine the dynamic carbon emissions of the steel-concrete composite structural bridge, which are then compared to the static carbon emissions. The carbon strength of the bridge is evaluated using a fuzzy comprehensive technique. The application analysis is conducted on the basis of a steel-concrete composite construction bridge in Beijing. According to the findings, carbon emissions are primarily concentrated during the preparation, production, and operation of building materials. The bridge's static and dynamic carbon emissions are 103.966 and 1378.674 ktCO 2 e, respectively. After material recovery, the values are 95.141 ktCO 2 e and 1107.751 ktCO 2 e, respectively. The ratio of dynamic and static carbon emissions ranges from 7 to 34, highlighting the significance of temporal value. After recycling the components, the bridge's static carbon strength dropped from 2.565 to 2.353, while its dynamic carbon strength fell from 2.422 to 2.210, both of which were medium carbon strengths. The model proposed in this study can successfully examine the carbon emissions and strength of bridges from both environmental and economic perspectives, and it can be used to select more environmentally friendly building materials and construction methods to increase bridge efficiency. It also provides valuable data assistance for the establishment and execution of environmental protection measures, thereby promoting the industry's long-term sustainable development.


  • Open Access

    Experimental Study on Fatigue Properties of Q420 Bridge Steel in a Deicing Salt Corrosion Environment in Western China

    by Tingkun Zhou, Wenjing Qiao, Shoufu Li, Fan Yang, Yiqian Li, Zhuoda Li

    The corrosive environment in the western region will adversely affect the fatigue performance of bridges. In order to determine the influence of the corrosion environment in western China on the fatigue failure of bridges, this paper simulated corrosion environment characteristics in northwest China, conducted alternating corrosion and high-cycle fatigue experiments on Q420 bridge steel, and used Origin (2019b 64Bit) to fit S-N curves of specimens with different corrosion periods to study the influence of corrosion damage in western China on their fatigue properties. Based on the damage theory, the corrosion fatigue failure degree of Q420 bridge steel was analyzed, and the crack propagation law was revealed by microscopic scanning of the fracture. The findings indicate that the damage to Q420 bridge steel progressively worsens with more prolonged corrosion exposure in the deicing salt conditions of western China. The 60-day corrosion resulted in a rust rate ηs of 2.17% and a corrosion rate K of 1.413 mm/a. The fatigue life of Q420 bridge steel is significantly affected by the coupling of stress level and corrosion damage. After 60 days of corrosion, the specimen’s fatigue limit decreases by 12.28%, which accelerates the fatigue property degradation rate of the specimen. The damage index effectively represents the internal damage behavior of materials under corrosion fatigue conditions. Fatigue damage escalates as the corrosion period extends, and the number of fatigue bands decreases, with the stress corrosion threshold σth diminishing by 1.77%, 3.55%, 4.61%, and 6.38% across various corrosion durations. The research results are significant for the fatigue failure prediction and reliability analysis of Q420 bridge steel in a deicing salt corrosion environment in western China.


  • Push-Out experiments on bearing capacity of perfobond leiste shear connectors after hydrochloric acid corrosion

    by Wenjing Qiao, Zhiyong Wang, Fan Yang, Baojun Zhao, Yunlong Li

    The paper study the shear bearing performance and failure mechanism of perfobond leiste (PBL) shear connectors after hydrochloric acid corrosion. Seven groups of specimens with PBL shear connectors were designed, these PBL shear connectors suffered from hydrochloric acid corrosion time of 0 h, 1 h, 4 h, 12 h, 24 h, 48 h and 72 h. Herein, loading process, shear bearing capacity, load-slip curve, and failure mode were obtained by the push-out experiment, and then refined the finite element model (FEM) was established. Following the parameter analysis of 14 experiment specimens and 77 finite element models, the force mechanism of PBL shear connectors after hydrochloric acid corrosion were analyzed. With the extension of the corrosion time of PBL shear connectors, the shear capacity, deformation capacity, and slip decrease gradually. Among them, the finite element parameter analysis of PBL shear connectors demonstrates that their shear bearing capacity has the ability to be modified by raising the concrete strength, the diameter of penetrated steel bar, the diameter of steel plate holes, and changing the end bearing mode. On condition that the concrete strength is raised from C30 to C60, the shear capacity is reduced by 5.19%. When the diameter of penetrated steel bar has mushroomed from 12 mm to 25 mm, the shear capacity declines by 9.59%. Meanwhile, the shear bearing capacity of the end bearing is about 2 times of the non-end bearing. Once the diameter of steel plate holes adds 35 mm to 65 mm, the shear capacity just decreases by 2.48%. Finally, the reliability of PBL shear connectors are analyzed by the exit experiment data and the shear bearing capacity formula of PBL shear connectors. The research results can offer a reference for the shear bearing capacity of PBL shear connectors after hydrochloric acid corrosion.


  • Open Access

    Deformation Prediction and Analysis of Soft Rock Roadway with High Altitude and Large Buried Depth Based on Particle Swarm Optimization LSTM Model

    by Bin Du, Huahui Yi, Fan Yang

    Deformation Prediction and Analysis of Soft Rock Roadway with High Altitude and Large Buried Depth Based on Particle Swarm Optimization LSTM Model: Deformation prediction is an important basis for roadway information construction, especially for soft rock roadway at high altitude and large buried depth, whether the deformation of roadway surrounding rock can be effectively and accurately predicted is an important basis for judging the stability of roadway surrounding rock. However, at present, the research on the informatization construction of the roadway is not in-depth, and the intelligent prediction technology for the deformation of the surrounding rock of the roadway is still in its infancy, and the accuracy of deformation prediction is also low. Therefore, based on the research of domestic and foreign researchers, in order to solve the breakthrough of related technology, this paper puts forward the deformation prediction and control technology of high altitude and deep buried soft rock roadway based on a neural network model. This method is based on the traditional prediction model and is replaced by the neural network, so as to improve the problems of low accuracy and large prediction deviation in the related deformation prediction of the traditional prediction model. At the same time, aiming at the problem of poor local weight and network search ability, an improved method using particle swarm optimization algorithm is proposed, which effectively considers the influence of local and global factors on the combined weight. Finally, the improved deformation prediction model of high altitude and deep buried soft rock roadway based on particle swarm optimization LSTM model is applied to an engineering example and compared with the traditional model to explore its feasibility and effectiveness. The results show that the prediction model has higher prediction accuracy than the traditional prediction model, and the relative deviation of the prediction results is controlled within 2. At the same time, compared with other models (BP neural network model), it has relatively higher accuracy and stability. The research results can provide a new idea for the deformation prediction of soft rock roadway with high altitude and deep burial.


  • Open Access

    Mechanical Investigation of Carbon Steel under Strong Corrosion Effected by Corrosion Pits

    by Fan Yang, Miao M. Yuan, Wen J. Qiao, Na N. Li, Bin Du

    This study investigated the effect of corrosion pits on the mechanical degradation of steel Q345 under strong acid corrosion. The experiment on a total of 27 steel Q345 specimens corroded by 36 industrial hydrochloric acid for 0h, 1h, 2h, 4h, 8h, 12h, 24h, 48h, and 72h, respectively, is conducted to study failure mode and stress-strain curves. After that, a noncontact topography scanner (DSX500) scanned geometric parameters of corrosion pits in steel Q345 to establish its mechanical degradation. The surface morphology and the corresponding degradation law of corroded steel are also revealed. In addition, the steel plastic fracture criterion taking into account equivalent plastic fracture strain and average stress triaxiality T is adopted to propose the uniform pit model. The analysis results show that the failure mode gradually changes from ductile to brittle. It is noted that the depth and relative size of the corrosion pit are the main factors affecting the increase of the maximum pit coefficient. Further, FEM based on uniform corrosion pits is found by the flexible damage evolution criterion. Its calculation results are entirely consistent with experimental results, indicating that this model can mirror the surface morphology of steel suffering strong corrosion, and simulated accurately stress flow law and necking failure of strong corrosion steel. The proposed criterion is validated with verification results and can provide good references for the design of steel bridges under strong corrosion.


  • Open Access

    Mechanical Degradation of Q345 Weathering Steel and Q345 Carbon Steel under Acid Corrosion

    by Fan Yang, Miao M. Yuan, Wen J. Qiao, Na N. Li, Bin Du

    In this work, a mechanical degradation of weathering steel and carbon steel caused by strong acid corrosion has been studied in order to clarify the threat of industrial acid vehicle leakage to steel structure bridge. Twenty-seven specimens of Q345 weathering steel plates and Q345 carbon steel plates were immersed in a 36 hydrochloric acid solution at room temperature, with the corrosion time being 0h, 1h, 2h, 4h, 8h, 12h, 24h, 48h, and 72h, respectively. Subsequently, the obtained specimens were subjected to a uniaxial tensile test to determine the stress-strain curves. The surface morphology was studied by the noncontact surface topography instrument DSX500. By analyzing the degree of mechanical degradation, the constitutive models of test steels under strong acid corrosion were established. The analysis of results shows that the corrosion rate of carbon steel is higher than that of weathering steel. After 72 hours of corrosion, the mass loss rate of carbon steel and weathering steel was 4.77 and 4.30, respectively. The maximum corrosion pit depth of carbon steel was 25.52μm higher than that of weathering steel. The constitutive models were in good agreement with the test results, and the resistance to corrosion degradation and deformation of the weathering steel was higher compared to the carbon steel. The results can serve as a guideline for designing steel constructions of improved durability.


  • Electromagnetic optimization using Taguchi method: a case study of linear antenna array design

    by Wei-Chung Weng, Fan Yang, V. Demir, A. Elsherbeni

    This paper introduces a novel electromagnetic optimization technique using Taguchi method. To illustrate this technique, a linear antenna array is optimized to realize a null control pattern and a sector beam pattern. It is found that Taguchi method is easy to implement and it converges to the desired patterns quickly. This method is a good candidate for optimizing EM applications