Analysis of Longitudinal Timber Beam Joints Loaded with Simple Bending
Open Access
- 9 November 2020
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 12 (21) , 9288
Abstract
The joints in timber structures are often the decisive factor in determining the load-bearing capacity, rigidity, sustainability, and durability of timber structures. Compared with the fasteners used for steel and concrete structures, fasteners for timber structures generally have a lower load-bearing capacity and rigidity, with the exception of glued joints. Glued joints in timber structures constitute a diverse group of rigid joints which are distinguished by sudden failure when the joint’s load-bearing capacity is reached. In this contribution, the load-bearing capacity of a longitudinal joint for a beam under simple flexural stress is analyzed using glued, double-sided splices. Joints with double-sided splices and connecting screws were also tested to compare the load-bearing capacity and rigidity. A third series of tests was carried out on joints made using glued double-sided splices augmented with screws. The aim of this combined joint was to ensure greater ductility after the load-bearing capacity of the glued splice joint had been reached.Keywords
This publication has 8 references indexed in Scilit:
- Analysis on mechanical behavior of dovetail mortise-tenon joints with looseness in traditional timber buildingsSTRUCTURAL ENGINEERING AND MECHANICS, 2016
- Moment Resistance Performance Evaluation of Larch Glulam Joints using GFRP-reinforced Laminated Plate and GFRP RodJournal of the Korean Wood Science and Technology, 2016
- The Timber Tie Beam: The Analysis of Spatial Framework JointProcedia Engineering, 2015
- Solid timber beams strengthened with steel plates – Experimental studiesConstruction and Building Materials, 2014
- Mechanical properties of adhesives for bonding wood—A reviewInternational Journal of Adhesion and Adhesives, 2013
- Estimation of stiffness and strength in timber knee joints with adhesive and verification by experimentJournal of Wood Science, 2006
- The compatibility of structural adhesives with woodEuropean Journal of Wood and Wood Products, 2003
- Effect of excessive pretreatment of pine timber with CCA wood preservatives on the bond quality of PRF and TRF wood adhesivesEuropean Journal of Wood and Wood Products, 1985