Interface characteristic and mechanical performance of TiAl/Ti 2 AlNb diffusion bonding joint with pure Ti interlayer
Authors:
- 2 September 2020
- journal article
- research article
- Published by Wiley in Rare Metals
- Vol. 39 (12) , 1402-1412
Abstract
Solid‐state diffusion bonding (DB) of TiAl alloy and Ti 2 AlNb alloy was carried out using pure Ti as an interlayer at 1000 °C under 20 MPa for 60–120 min. The effects of bonding times on the interfacial microstructure and mechanical performance of the TiAl/Ti/Ti 2 AlNb bonded joints at room temperature (RT) were investigated detailly. The results demonstrated that the diffusion layers (DLs) mainly consisted of four characteristic layers, (I) single coarse α 2 phase adjacent TiAl alloy, (II) single refined α 2 phase at the bonding interface, (III) equiaxed/acicular α 2 phase embedded in β phase adjacent Ti 2 AlNb alloy and (IV) both equiaxed α 2 phase and acicular O phase embedded in β phase adjacent Ti 2 AlNb alloy, respectively. The thickness of the four layers increased with the increasing of the bonding time. The growth of DLs is controlled by diffusion and the reaction rate constant k for region I, II, III and IV are 1.22 × 10 −6 , 1.27 × 10 −6 , 2.6 × 10 −7 and 7.7 × 10 −7 m·s −1/2 , respectively. Meanwhile, the interface α 2 grain grows up without texture. The maximum tensile strength of 281 MPa was maintained at 1000 °C for 90 min under the pressure of 20 MPa. Consequently, the phase transformation and dynamic recrystallization behavior of the DLs were discussed.Keywords
Funding Information
- National Natural Science Foundation of China (51771150)
- National Key Research and Development Program of China (2016YFB0701303)
- Aeronautical Science Foundation of China (201936053001)
- National Natural Science Foundation of China (51771150)
- National Key Research and Development Program of China (2016YFB0701303)
- Natural Science Foundation of Shaanxi Province (2018JM5174)
- State Key Laboratory of Solidification Processing (2019-TS-07)
This publication has 31 references indexed in Scilit:
- Improving microstructure and mechanical properties of Ti43Al5Nb0.1B alloy by addition of FeRare Metals, 2019
- Microstructure and mechanical properties of a new Ti 2 AlNb‐based alloy after aging treatmentRare Metals, 2018
- Oxidation behavior of a novel multi‐element alloyed Ti 2 AlNb‐based alloy in temperature range of 650–850 °CRare Metals, 2018
- Hot Workability and Superplasticity of Low-Al and High-Nb Containing TiAl AlloysJOM, 2017
- Preparation of TiAl alloy powder by high‐energy ball milling and diffusion reaction at low temperatureRare Metals, 2015
- Design, Processing, Microstructure, Properties, and Applications of Advanced Intermetallic TiAl AlloysAdvanced Engineering Materials, 2012
- A study on transient liquid phase diffusion bonding of Ti–22Al–25Nb alloyMaterials Science and Engineering: A, 2009
- Review of alloy and process development of TiAl alloysIntermetallics, 2006
- Fabrication of TiAl components by means of hot forging and machiningIntermetallics, 2005
- Progress in structural materials for aerospace systems11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh.Acta Materialia, 2003