Microstructure and mechanical properties of a new Ti 2 AlNb‐based alloy after aging treatment
Authors:
- 24 August 2018
- journal article
- research article
- Published by Wiley in Rare Metals
- Vol. 37 (11) , 942-951
Abstract
A new Ti 2 AlNb‐based alloy with the composition of Ti–22Al–25Nb–1Mo–1V–1Zr–0.2Si (at%) was fabricated in the sequence of arc melting, forging, solid solution and aging. Present paper focuses on the effects of aging temperatures (700, 750, 800, 850 and 900 °C) on microstructure, room‐temperature tensile properties as well as tensile properties at 650 °C and creep properties at 650 °C/150 MPa. It is obvious that the aging treatment promotes the precipitation of O lathes from B2 matrix. With aging temperature increasing, the content of O phase decreases and its size increases gradually, which leads to the decrease in tensile strengths both at room temperature and 650 °C and a little increase in ductility. For creep properties, the sample aged at 700 °C shows the best creep resistance due to its extremely high O phase content. Aging at 800 °C leads to the decrease in the content of O phase and softening of the alloy significantly. However, with aging temperature further increasing from 800 to 900 °C, the precipitated O phase will be coarsened gradually, which strengthens the alloy again.Keywords
Funding Information
- China Postdoctoral Science Foundation (No. 2017M613234)
- China Postdoctoral Science Foundation (No. 2017M613234)
This publication has 31 references indexed in Scilit:
- Instability of the O-phase in Ti–22Al–25Nb alloy during elevated-temperature deformationJournal of Alloys and Compounds, 2013
- Annealing response of the intermetallic alloy Ti–22Al–25NbIntermetallics, 2010
- Effect of iron and nickel impurities on creep and tensile behaviour of Ti–24Al–20Nb–0.5Mo alloyMaterials Science and Engineering: A, 2008
- Creep behavior and tensile properties of Mo- and Fe-added orthorhombic Ti–22Al–11Nb–2Mo–1Fe alloyScripta Materialia, 2007
- Abnormal acceleration of creep deformation rate above 700°C in the orthorhombic based Ti–22Al–27Nb alloyJournal of Alloys and Compounds, 2004
- Effect of boron microalloying on microstructure, tensile properties and creep behavior of Ti–22Al–20Nb–2W alloyMaterials Science and Engineering: A, 2001
- Tensile properties of Tungsten-modified orthorhombic Ti-22Al-20Nb-2W alloyScripta Materialia, 2001
- The individual effects of niobium and silicon on the oxidation behaviour of Ti3Al based alloysIntermetallics, 2000
- Creep behaviour of an orthorhombic phase in a TiAlNb alloyScripta Metallurgica et Materialia, 1993
- Microstructures and phase relationships in the Ti3Al + Nb systemScripta Metallurgica, 1989