Effect of reinforcement phases and post-cure temperature on adhesively bonded hybrid patch repair in indented glass/epoxy composite laminates
- 23 January 2023
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 99 (13) , 2031-2051
Abstract
This paper focuses on the experimental investigation on the effect of different fiber reinforcement phases and post-cure temperature to improve the strength recovery of adhesively bonded patch repair in glass/epoxy composite laminates. The repair was performed on the site of damaged region in the laminates by using various configurations of patches such as chopped glass (CG), chopped glass/carbon (CGC), chopped glass/kevlar (CGK), ply-by-ply glass (PG), ply-by-ply glass/carbon (PGC), ply-by-ply glass/kevlar (PGK), stitched glass (SG), stitched glass/carbon (SGC), and stitched glass/kevlar (SGK). The result reveals that the SGK hybrid patch repaired laminates offered a strength recovery by 101.5% as compared with damaged laminates. Further, the SGK hybrid patch was subjected to post-cure temperatures of 50°C, 70°C, 90°C, and 110°C which were considered based on the glass transition temperature (Tg) of glass/epoxy laminates. The result shows that the SGK hybrid patch with a post-cured temperature of 50°C has equal strength with virgin laminates and the strength recovery was improved by 112.9% as compared with damaged laminates. This study concluded that the adhesively bonded hybrid patch repair with a post-cure temperature of 50°C can be used for various fiber-reinforced polymer (FRP) industries to repair laminated composites.Keywords
This publication has 47 references indexed in Scilit:
- Effects of the adhesive disband on the performances of bonded composite repairs in aircraft structuresMaterials & Design (1980-2015), 2012
- A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned compositesComposites Part A: Applied Science and Manufacturing, 2010
- Mechanical Behavior of Glass/Epoxy Composites at Liquid Nitrogen TemperatureJournal of Reinforced Plastics and Composites, 2008
- Improvements in Mode I interlaminar fracture toughness and in-plane mechanical properties of stitched glass/polyester compositesComposites Science and Technology, 2007
- Modelling single and double-lap repairs on composite materialsComposites Science and Technology, 2005
- Studies on the low-velocity impact response of woven hybrid compositesComposite Structures, 2005
- Computation of the stress intensity factors for repaired cracks with bonded composite patch in mode I and mixed modeComposite Structures, 2002
- Residual stress development during the composite patch bonding process: measurement and modelingComposites Part A: Applied Science and Manufacturing, 2002
- Improving the delamination resistance of CFRP by stitching—a reviewComposites Science and Technology, 1994
- Curing of Epoxy Matrix CompositesJournal of Composite Materials, 1983