CKChelliash Suresh Kumar

Chelliash Suresh Kumar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chelliash Suresh Kumar has a total of 71 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Suitability of Industrial Waste Iron Particles in Epoxy Matrix Composites for Sustainable Energy Storage

    by Meenakshi Kunchidapadam Karthik, Chelliash Suresh Kumar, Carlo Santulli, Munisamy Sundararaj

    The effect of iron filler extracted from industrial waste to improve thermo-mechanical properties of epoxy matrix composites to offer sustainable energy storage was studied. In particular, α-iron filler (BCC) particles with average size of 50 µm, obtained by ball milling, were used in different tenors (5, 10 and 15 wt %) into the resin. Tensile, flexural, impact, hardness, thermal conductivity, thermogravimetric, differential thermal analysis, and dynamic mechanical analysis tests were conducted. The most suitable configuration was proved to be the one with 10 wt % filler. In particular, tensile strength and stiffness, flexural strength and modulus, impact strength and hardness samples showed an improvement of 89, 124, 24, 40, 239, and 11.3% as compared with pure epoxy samples, respectively. Similarly, thermal conductivity, enthalpy, storage modulus and damping factor have been improved by 213, 116, 27.1, and 16.4%, respectively. Crystallinity index and characteristic bonds between filler and epoxy matrix were studied through X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. Microstructural and energy dispersive X-ray analyzes were used to validate the properties of filler loaded samples, concluding that the iron filler loaded epoxy, especially in an amount of 10 wt % filler, can be suitable for making thermal energy storage devices.

  • Synergistic Effects of Chemical Treatment and Hybridization to Improve Thermo‐Mechanical Performance in Banana/Pineapple Reinforced Polymer Composites

    by R. Karthikeyan, N. Sravanth Kumar Reddy, C. Suresh Kumar, M. Sundararaj

    The poor compatibility of natural fibers in polymer matrix composites affects their thermal and mechanical properties, which limits their applications. The present work investigates the improvement of thermal and mechanical behaviors of banana, pineapple, and their hybrid composites through alkaline pretreatment followed by acetylation (A‐A) treatment. Different configurations of composites, namely untreated banana (UBC), treated banana (TBC), untreated pineapple (UPC), treated pineapple (TPC), untreated hybrid (UHC), and treated hybrid (THC), were fabricated. Structural, mechanical, and thermal analyses were conducted on the composite specimens. The results reveal that cellulose chain packing and hydrophobicity of treated fibers were increased for improving interfacial adhesion with the unsaturated polyester matrix. At 40 wt%, TBC, TPC, and THC showed tensile modulus improvements of 29.4%, 26.3%, and 30.2% over UBC, UPC, and UHC, respectively. However, 40 wt% of THC improved flexural, impact strength, and hardness by 43.3%, 35.7%, and 11.1% compared to UHC. The stiffness of THC increased by 47.1% and its damping capacity was higher among all cases. Subsequently, the maximum degradation temperature and yield char of THC were improved to 387.9°C and 8.2%. Finally, theoretical and experimental models were developed to assess the ultimate strength of composites and were well correlated with microscopic analysis. This study concludes that the treated hybrid composites can be used for automotive door panels, bicycle frames, sporting goods, aircraft interior panels, and lightweight structural applications.


  • The effect of hybridization and stainless steel mesh on the post‐impact performance of needle punched banana/pineapple/unsaturated polyester composites

    by R. Karthikeyan, N. Sravanth Kumar Reddy, C. Suresh Kumar, M. Sundararaj

    The main limitations of using natural fibers reinforced unsaturated polyester (UPE) composites is poor impact damage behaviors. This work focuses to improve impact damage resistance and residual strength of needle punched banana and pineapple fibers UPE composites by hybridization and incorporating stainless steel (SS) mesh. Different configurations such as banana/UPE (PB), pineapple/UPE (PP) and banana/pineapple/UPE (H) composites were fabricated. Later, SS mesh was incorporated in PB, PP and H composites which are denoted as BS, PS and HS respectively. All specimens were impacted with incident energy of 3.5 and 15 J using Fractovis instrumental low velocity impact tester at 2 and 4 m/s respectively. Subsequently, residual strength of impacted specimens was estimated using three point bending test. Results reveal that the HS composites have least residual dent of 0.89 and 3.9 mm and maximum contact force of 1507 and 1959 N were obtained under the impacted velocity of 2 and 4 m/s respectively, which indicated better damage resistance followed by PS, PP, BS, H and PB specimens. Similarly, the least absorbed energy of 1.9 and 12 J observed in HS composites showed better impact damage tolerance. Moreover, the damage degree and performance index were computed and validated with obtained results. The least reduction of residual strength of 1.2% and 3.2% in HS composites confirmed the better impact damage resistance as compared with all other configurations. Finally, microstructural analysis was performed to correlate the impact induced damage mechanisms. Highlights: HS composites exhibited the least residual dent of 0.89 mm Impact load bearing capacity of HS composites was drastically improved by 280% Strong interfacial adhesion between the banana fiber and SS mesh was observed HS composites showed greater impact resistance under both velocities There is no significant reduction of residual strength in HS composites

  • A comprehensive investigation on tensile behavior of surface‐modified Kevlar hybrid nanocomposites for similar and dissimilar joints

    by Ramasamy Nallamuthu, Arumugam Vellayaraj, Suresh Kumar Chelliah, Prabhu Bose, Arunkumar Thirugnanasamabandam

    The main objective of this study is to enhance the interfacial adhesion between Kevlar fiber‐reinforced epoxy composite for a single lap joint. This has been achieved by performing various chemical treatments on Kevlar fiber. Moreover, the nanofiller‐added epoxy matrices were also used for investigating its potentiality in a single lap joint. A thorough comparison has been made among various chemical treatments based composite and modified epoxy matrix composite. The tensile strength of similar and dissimilar single lap joints was investigated through experiments and was analyzed by SEM, XRD, and Weibull model. It was perceived that the tensile shear strength and Weibull modulus of the treated similar Kevlar lap joint were 21.45% and 40.18% higher than the similar nanocomposite joint; also, it has been found that an increment of about 79.8% and 76.64% with that of untreated similar Kevlar joint. Furthermore, the failure progression of optimized joints was evaluated by acoustic emission (AE) monitoring.Highlights: Interfacial adhesion study of Kevlar fiber with matrix in single lap joint. Kevlar surface modification and epoxy modified by nanocomposites were used. The lap shear strength of similar and dissimilar single lap joint composites. SEM, XRD, and Weibull analysis and AE monitoring were used for this research. Chemical treatments on Kevlar fiber have enhanced the interfacial adhesion.


  • The influence of thickness and recycled milled glass fiber fillers on the delamination resistance of polymer composite angle brackets

    by Dinesh Babu Venkatesan, Arumugam Vellayaraj, Suresh Kumar Chelliah

    Composite structures with L, C, and T shape geometries are commonly used in the design of aerospace structural components. These complex structures are prone to delamination failure at the curved region. This study investigates the effect of thickness and recycled milled glass fiber fillers to improve the strength properties and delamination resistance of glass/epoxy composite angle brackets. Different thicknesses of 3.5 mm (16 layers), 5 mm (24 layers), and 6.5 mm (32 layers) specimens were subjected to four‐point bending test with acoustic emission (AE) monitoring for evaluating damage resistance. Mechanical results reveal that the specimen with a higher thickness of 6.5 mm has better damage tolerance, followed by 3.5 and 5 mm angle brackets. Moreover, the location of AE signals and % of AE hits noticed the initiation and propagation of delamination in 5 mm thickness specimen at the earlier stage of loading. However, the curved beam strength and interlaminar tensile strength (ILTS) of 5 mm thickness specimen were improved by 31.02% and 19.2% respectively, through the incorporation of 2 wt% of fillers. Further, the interfacial adhesion between the fillers and epoxy matrix was studied using Fourier‐transform infrared analysis to confirm the improvement of delamination resistance in 5 mm thickness specimen. Finally, the mechanical and AE results were well correlated with field emission scanning electron microscope images to characterize the damage mechanisms in composite angle brackets.Highlights: Effect of thickness on the delamination resistance of composites was studied. Interlaminar properties of composite angle brackets were assessed. Acoustic emission parameters were used to study the damage mechanisms. Recycled milled glass fillers were employed to improve delamination resistance. Mechanical and acoustic emission results were correlated with field emission scanning electron microscope images.


  • Mechanical, Acoustical, and Morphological Characterization of Impact Damage on the Effect of Temperature in Hybrid Polymer Composites

    by Suresh Kumar Chelliah, Saravanakumar Kannivel, Arumugam Vellayaraj

    This work focuses on the investigation of impact damage resistance of basalt/epoxy, hemp/epoxy, and hybrid/epoxy composites under different temperatures of 30°C, 50°C, and 65°C. Unidirectional basalt and nonwoven hemp fibers were reinforced with LY556 epoxy resin using a hand layup technique. Mechanical, acoustical, and morphological analyses were performed to study the impact damage behaviors of composites. To start with, the specimens were subjected to a drop weight impact test with an impact velocity and incident energy of 1.5 m/s and 2.17 J, respectively. Subsequently, the three-point bending test was conducted on the impacted specimens with acoustic emission (AE) monitoring to evaluate the residual flexural strength and failure modes. The mechanical results showed that the hybrid/epoxy composites impacted at 50°C have better impact damage resistance attributed to low absorbed energy, deformation, residual dent, and higher residual strength. AE results showed that the matrix cracking failure modes were reduced with increasing temperature, whereas other failure modes were increased. Furthermore, the different damage mechanisms were correlated with the scanning electron microscopy images. The results provided evidence that the hybridization of natural fiber composites can be a suitable material for the application of impact loading at elevated temperatures.


  • Effect of reinforcement phases and post-cure temperature on adhesively bonded hybrid patch repair in indented glass/epoxy composite laminates

    by Shravan Kumar Chinta, Dilip Sankar S, Bhaskar Nagesh G, Himakarthik R, Naga Rajagopal B, Suresh Kumar C, Sundararaj M

    This paper focuses on the experimental investigation on the effect of different fiber reinforcement phases and post-cure temperature to improve the strength recovery of adhesively bonded patch repair in glass/epoxy composite laminates. The repair was performed on the site of damaged region in the laminates by using various configurations of patches such as chopped glass (CG), chopped glass/carbon (CGC), chopped glass/kevlar (CGK), ply-by-ply glass (PG), ply-by-ply glass/carbon (PGC), ply-by-ply glass/kevlar (PGK), stitched glass (SG), stitched glass/carbon (SGC), and stitched glass/kevlar (SGK). The result reveals that the SGK hybrid patch repaired laminates offered a strength recovery by 101.5% as compared with damaged laminates. Further, the SGK hybrid patch was subjected to post-cure temperatures of 50°C, 70°C, 90°C, and 110°C which were considered based on the glass transition temperature (Tg) of glass/epoxy laminates. The result shows that the SGK hybrid patch with a post-cured temperature of 50°C has equal strength with virgin laminates and the strength recovery was improved by 112.9% as compared with damaged laminates. This study concluded that the adhesively bonded hybrid patch repair with a post-cure temperature of 50°C can be used for various fiber-reinforced polymer (FRP) industries to repair laminated composites.