Cellulose Nano Crystals (CNC) as Additive for a Bio-Based Waterborne Acrylic Wood Coating: Decay, Artificial Weathering, Physical and Chemical Tests
Open Access
- 21 January 2023
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 13 (3) , 442
Abstract
Wood coatings prolong the service life of wood-based products, but they are usually of synthetic origin. The aim of the present article is to reduce the fossil-based compounds in a commercial waterborne acrylic coating by CNC addition and to test its performance. The coatings were applied on European beech and Norway spruce wood in order to test durability against Gloeophyllum trabeum (brown wood rot) and Trametes versicolor (white wood rot). Artificial weathering and blue stain, contact angle, physical tests (adhesion, impact and scratch test), chemical (FTIR) and morpho-anatomical analysis (SEM) were carried out. CNC addition increased viscosity, limiting the spreading of the coating into wood pores as visible after SEM observation, which reduced coating adhesion on the substrate. CNC improved fungal resistance as seen by a reduced mass loss and FTIR spectroscopy thanks to crosslinks formation, which reduced water sorption as well. Color change was not significant, and, on the other hand, glossiness was reduced but resulted as more homogeneous than control. CNC addition gave good results also in blue stain protection. CNC improved scratch resistance, but no visible change to impact was registered. CNC has promising results in coatings depending on wood and fungal species and presence of further commercial additives (biocides).Keywords
Funding Information
- PON-MISE “INLEGNO” (F/2000 03/01-03/X45, A0375-2020-36712, IC LES PST 0481-09)
- POR FESR Lazio: Gruppi di ricerca 2014–2020 “BIOEDILCARBON” (F/2000 03/01-03/X45, A0375-2020-36712, IC LES PST 0481-09)
- Slovenian Research Agency funding through program P4-0015 and Infrastructural center (F/2000 03/01-03/X45, A0375-2020-36712, IC LES PST 0481-09)
This publication has 66 references indexed in Scilit:
- Wettability versus roughness of engineering surfacesWear, 2011
- Tebuconazole and propiconazole tolerance and possible degradation by Basidiomycetes: A wood-based bioassayInternational Biodeterioration & Biodegradation, 2010
- Effects of pigments on the UV degradation of wood‐flour/HDPE compositesJournal of Applied Polymer Science, 2010
- Cellulose nanocrystal-filled poly(acrylic acid) nanocomposite fibrous membranesNanotechnology, 2009
- Raw Materials for Wood Coatings (1) – Film Formers (Binders, Resins and Polymers)2009
- Experimental and theoretical behavior of exterior wood coatings subjected to artificial weatheringJournal of Coatings Technology and Research, 2008
- The Protective Role of Melanin Against UV Damage in Human Skin†Photochemistry and Photobiology, 2007
- Effects of UV light irradiation on colour stability of thermally modified, copper ethanolamine treated and non-modified wood: EPR and DRIFT spectroscopic studiesWood Science and Technology, 2007
- Coating compositions based on modified phenol-formaldehyde resin and urethane prepolymersProgress in Organic Coatings, 2004
- Rheological approach to the capillary penetration of coating into woodJournal of Coatings Technology, 2001