A simple method for detecting cracks in soil–cement reinforcement for centrifuge modelling
Authors:
- Shuji TamuraSTShuji Tamura
- Daniel WilsonDWDaniel Wilson
- Ross W. BoulangerRBRoss W. Boulanger
- C. GuneyOlgunCGC. GuneyOlgun
- 1 November 2018
- journal article
- research article
- Published by Emerald Publishing in International Journal of Physical Modelling in Geotechnics
- Vol. 18 (6) , 281-289
Abstract
This paper presents the development, implementation and experimental evaluation of a new crack detection mechanism for centrifuge modelling. The proposed mechanism is a brittle conductor bonded to cement providing a binary indication of if, and when, a sensor is cracked. The results of a pair of large centrifuge tests were used to evaluate the effectiveness of the proposed crack detection mechanism. Each test model included a soil profile consisting of a 23 m thick layer of lightly over-consolidated clay, underlain and overlain by thin layers of dense sand. The centrifuge models had two separate zones, a zone without reinforcement and a zone with an ‘embedded’ soil–cement grid, which had a unit cell area replacement ratio Ar = 24%. Models were subjected to 13 different shaking events with peak base accelerations ranging from 0·01 to 0·55g. The performance of the proposed crack detection mechanism was examined using (i) post-test crack mapping in the soil–cement grids, (ii) results of the crack detection system and (iii) time series of accelerations, displacements and footing rotation. The results from the centrifuge test showed that the proposed crack detection method accurately captured if, and when, cracking occurred in the soil–cement grid at the locations of the sensors.Keywords
This publication has 11 references indexed in Scilit:
- Dynamic centrifuge tests of structures with shallow foundations on soft clay reinforced by soil-cement gridsSoils and Foundations, 2017
- Dynamic Centrifuge Tests of Soft Clay Reinforced by Soil–Cement GridsJournal of Geotechnical and Geoenvironmental Engineering, 2016
- Fiber-optic sensor applications in civil and geotechnical engineeringPhotonic Sensors, 2011
- Automated detection of cracks in buried concrete pipe imagesAutomation in Construction, 2006
- The use of antiresonances for crack detection in beamsJournal of Sound and Vibration, 2004
- Foundation Liquefaction Countermeasures for Earth EmbankmentsJournal of Geotechnical and Geoenvironmental Engineering, 1998
- Detection of structural damage through changes in frequency: a reviewEngineering Structures, 1997
- The history and development of acoustic emission in concrete engineeringMagazine of Concrete Research, 1996
- Damage Assessment in Concrete Using Quantitative Acoustic EmissionJournal of Engineering Mechanics, 1991
- A Vibration Technique for Non-Destructively Assessing the Integrity of StructuresJournal of Mechanical Engineering Science, 1978